diy turbo set up - searched for it already...
hey there
newbie here. been visting the board for a while and i'm looking to participate. got a question: if I do a non-intercooled turbo set up initially and decide later to go with a intercooler do I have to remount the turbo so that the exit side of the turbo is closer to the driver side so that piping can enter the intercooler and exit on the t-body side? Any help would be appreciated especially by some resident diyer and fellow junk yard junkies. thx - twizt http://images.zeroforum.com/smile/emsmile.gif |
Re: diy turbo set up - searched for it already... (twizt2)
you wont haev to remount the turbo, you may have to spin the compresor housing around a tad depending on your setup. You will definitely need to make new piping.
|
Re: diy turbo set up - searched for it already... (TurboInteg95)
turbo- so if the compressor side is facing towards the passengerside what path does the tubing take to from the turbo to get to the intercoller and then to the throttle body?
|
Re: diy turbo set up - searched for it already... (twizt2)
Same deal regardless of which side the comp is on - down and 90 degree bend, follow teh radiator to the driver's side fender, wrap around the bumper support to the front and into the intercooler.
|
Re: diy turbo set up - searched for it already... (dbman96)
Same deal regardless of which side the comp is on - down and 90 degree bend, follow teh radiator to the driver's side fender, wrap around the bumper support to the front and into the intercooler. |
All times are GMT -8. The time now is 02:53 AM. |
© 2024 MH Sub I, LLC dba Internet Brands