d16z6 specs
i need the info for the following feilds for my dyno program...
i have the d16z6 motor the program is Dyno 2000 what does it mean when it says block stock bore in inches stock stroke in inches cyl volume in cc total volume in cubic inches induction manifold type induction flow in cfm camshaft type camshaft liters cam specs, seat to seat timing int lift@valve exh lift@valve ivo (btdc) evo (bbdc) ivc (abdc) evc (atdc) |
|
bump. i want to know too
|
bump
|
Re: d16z6 specs (PooOnMyShoe942)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PooOnMyShoe942 »</TD></TR><TR><TD CLASS="quote">
stock bore in inches= 2.95" stock stroke in inches= 3.54" cyl volume in cc= 34.6cc total volume in cubic inches=?? induction manifold type=single throttle body,multi port injection induction flow in cfm=about 160cfm@28" camshaft type=Sohc solid camshaft liters=? is that lifters or liters? cam specs, seat to seat timing=?? int lift@valve= .384 exh lift@valve= .370 ivo (btdc)=? evo (bbdc)=? ivc (abdc)=? evc (atdc)=? </TD></TR></TABLE> |
i know that the d16y8 was blessed with more midrange torque than the y6.
how was this accomplished? |
All times are GMT -8. The time now is 05:53 PM. |
© 2024 MH Sub I, LLC dba Internet Brands