do i need to grease anything when replacing release bearing and clutch?
 

as title states.

Re: do i need to grease anything when replacing release bearing and clutch? (crx1856)
 

If I remember right, you grease the inside of the pilot bearings and the shaft coming out of the transmission.

Re: do i need to grease anything when replacing release bearing and clutch? (sporkcrx)
 

Yes you need to grease the imput shaft, where the release bearing slides on, the inside of the release bearing, take the throw out fork out, and becareful theres a small ball you dont want to lose that.

Grease where the fork touches the throw out bearing, and where the ball pivots on the fork. Thats what i did, anything that moved got greased. https://honda-tech.com/forums/images/smilies/emthup.gif

http://www.c-speedracing.com has a clutch install on their site.

Re: do i need to grease anything when replacing release bearing and clutch? (Moe)
 

https://honda-tech.com/forums/images/smilies/emthup.gif to a kid who knows where to grease!!!

Re: do i need to grease anything when replacing release bearing and clutch? (drumking15)
 

don't forget the little ball on the end of the slave cylinder.