best cam gears???
 

anyone got any opinions?

Re: best cam gears??? (Boosted97Lude)
 

worked with crower and Toda. both are great quality

Re: best cam gears??? (92JDMSiR)
 

skunk2 https://honda-tech.com/forums/images/smilies/emthup.gif

Re: best cam gears??? (bambooluv)
 

STR https://honda-tech.com/forums/images/smilies/emthup.gif

Re: best cam gears??? (00si5)
 

Skunk2 are also sweet.

A lot of people like Toda and Spoon because they're steel, but I haven't had any problems with the aluminum ones.

Never used them, but Unorthodox always makes badass stuff, but for the price you can probably get the Toda or Spoon ones.

Re: best cam gears??? (Hatchblack)
 

I have the Skunk 2 Cam Gears...but you should take a look at the new Golden Eagle ones!

Re: best cam gears??? (Boosted97Lude)
 

skunk2 https://honda-tech.com/forums/images/smilies/emthup.gif

Re: best cam gears??? (accordexchange)
 

i was thinking of AEM, since i have AEM EMS, AEM fuel rail, AEM filter and AEM FPR, but i am astill open to other opinions. does anyone have a specs or anything comparing them?



[Modified by Boosted97Lude, 11:29 PM 2/10/2003]

Re: best cam gears??? (Boosted97Lude)
 

aem has 3-bolt design vs. skunk2's 6-bolt design... no personal experience with the aem cam gears but i hear people say that they slip...

Re: best cam gears??? (Boosted97Lude)
 

Skunk2 are nice.

Re: best cam gears??? (accordexchange)
 

I have the old school AEM 3-bolts on my GS-R and they never slipped on me even though everyone told me they were going to. I just bought the new STR cam gears with the funky markings for my LS/VTEC. They look awesome but the markings take a little getting used to at first.

Re: best cam gears??? (Chrome Pipes)
 

skunk are bitch to adjust. they have a bolt right on the timing marks. stupid design. go with GE.

Re: best cam gears??? (MotorMatrix.com)
 

What does every one think of JUN? Or should I save the cash and go skunk2 or GE?


[Modified by KCHybrid, 9:11 AM 2/11/2003]

Re: best cam gears??? (KCHybrid)
 

Skunk2 https://honda-tech.com/forums/images/smilies/emthup.gif

ditto
I'd rather trust 6 bolts

Re: best cam gears??? (MotorMatrix.com)
 

hehe yeah I agree with ya mike on that one thats why yo just leave it at 0 and get custom made crank wheel and trigger and tune it with your stand alone. https://honda-tech.com/forums/images/smilies/emwink.gif The only reason I went with skunk is the 6 bolts compared to aem and gem's. any six would have worked for me .-pdang


heres my experience with h series cam gears,
aem 3 bolts sliped a little,
crowers are nice but expensive,
skunks old ones had to hammer pretty hard onto cam,
unorthodox really nice but once again the price is outrageous.

Re: best cam gears??? (Boosted97Lude)
 

Go with some Tapp Auto cam gears.....

http://www.tappauto.com/images/products/camgears.jpg

Check them out at www.tappauto.com


[Modified by GEN2TEG, 4:23 PM 2/11/2003]

Re: best cam gears??? (GEN2TEG)
 

If you look at those cam gears the timming marks, SUCK!!
you cant even see the timing marks in the pictures!!!

TAPP gears look like they suck https://honda-tech.com/forums/images...s/emthdown.gif https://honda-tech.com/forums/images...s/emthdown.gif

Brian

Re: best cam gears???
 

http://ebay2.ipixmedia.com/abc/M28/_...cfdc3a/i-1.JPG
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2402912242

I just got this set of new STR gears.. 145 for both, pretty decent

Jeff


[Modified by AbaZ, 6:06 PM 2/11/2003]

Re: best cam gears??? (AbaZ)
 

Killer deal, I paid like $180 for mine which was cheap.

Re: best cam gears??? (Boosted97Lude)
 

stock https://honda-tech.com/forums/images/smilies/emthup.gif

Re: best cam gears??? (trbob16a)
 

I just bought the Skunk2's https://honda-tech.com/forums/images/smilies/emthup.gif but by the looks of the STR's, those woulda been sweet as well. 6 bolt https://honda-tech.com/forums/images/smilies/emthup.gif https://honda-tech.com/forums/images/smilies/emthup.gif

Re: best cam gears??? (Boosted97Lude)
 

After using and looking at quite a few cam gears...this is my opinions.

STR, Unorthodox, Spoon, Toda, Endyn, GE are all very good designs and I would have no problems using them on any of my future engine builds or recommending them to friends for their projects. Right now I 'm using a set of STRs becuse of the economical price versus features. But I think if you went with any of the above gears you would be happy.

AEM makes other great products but I personally steer clear of their gears mainly because of the three bolt design. Does it slip or not?.....who really knows, but I'm not gonna chance it on my engine.


[Modified by SLPR, 2:15 PM 2/11/2003]

Re: best cam gears??? (SLPR)
 

STR is the way to go!!! I have the old style with the 3 bolt and they haven't slipped yet!!! I'm looking to get the new style soon!!! https://honda-tech.com/forums/images/smilies/emwink.gif

Re: best cam gears??? (Boosted97Lude)
 

I'm not too fond of AEM gears after seeing how they don't even line up right for my engine (89 Integra).

http://www.muller.net/sonny/crx/cami...aemgears-3.jpg

The black marks are where the timing marks are on the STOCK gear.

That, and the gear is about .080" too thick in the center of it. I can't put the timing cover back on. https://honda-tech.com/forums/images/smilies/mad.gif

Sonny

Re: best cam gears??? (Boosted97Lude)
 

spoon