Timing belt cover for a b20 vtec.
 

Can anyone share from what motor timing belt covers can be use on a b20vtec with a b16 head. I have been looking around and I hear different comments. Can I use all gsr covers. Or b20 bottom and both b16 upper covers. :shrug:

Re: Timing belt cover for a b20 vtec.
 

Any year b20 block cover and any year vtec b-series upper

Re: Timing belt cover for a b20 vtec.
 

any obd2 lower cover (if using pump with ckf sensor provisions). GSR/ITR upper covers. You will have to shave some off the back of the inner cover if you want that to fit.

Re: Timing belt cover for a b20 vtec.
 

the bottom block is jdm. what if I use a the upper covers from a 2000 si. do I have to shave the back to make it fit.

Re: Timing belt cover for a b20 vtec.
 

Here's the facts:

There is very little effort to make the complete timing set work and fit excellent. The pictures show a tiny little tab that gets removed from the block rear cover and a tiny slot made for a rib on the motor as shown. Afterwards it will fit excellent and allign almost perfect with the upper cover except for a very small, nearly unnoticable gap on the rear where they are meeting with the water pump. Not a gap really, just spread apart slightly, but fits with all the hardware fine.

Re: Timing belt cover for a b20 vtec.
 

thanks for the pictures. those covers are from a gsr/type r.