4 lug to 5 lug conversion
Can i take a V6 accords 5 lug hub and put it on my 2001 accord which has 4 lug?
|
Re: 4 lug to 5 lug conversion
i have all the suspension, steering, and brakes parts from the accord V6
|
Re: 4 lug to 5 lug conversion
I know the rear's are the same. Honda lists the same part number for the front knuckles. It should work.
|
Re: 4 lug to 5 lug conversion
Yes you can
|
Re: 4 lug to 5 lug conversion
ok thanks guys
|
Re: 4 lug to 5 lug conversion
what about the driveshafts are they the same
|
Re: 4 lug to 5 lug conversion
I just did the conversion last week, and assuming you already have rear disk brakes, it's fairly simple.
You will need: rear v6 hub bearing assy, rear disks (may reuse calipers and pads) front v6 hub, new bearings, v6 calipers, v6 discs and pads(bigger than 4cyl) Dorman makes fairly priced hubs it's what i used. do a search, there's a few DIY about it. axles will fit without issues btw |
Re: 4 lug to 5 lug conversion
ok thanks
|
Re: 4 lug to 5 lug conversion
[QUOTE=Nathan007;48699281]I just did the conversion last week, and assuming you already have rear disk brakes, it's fairly simple.
You will need: rear v6 hub bearing assy, rear disks (may reuse calipers and pads) front v6 hub, new bearings, v6 calipers, v6 discs and pads(bigger than 4cyl) Dorman makes fairly priced hubs it's what i used. do a search, there's a few DIY about it. axles will fit without issues. i know this thread is old but its worth a try can the same be done with a 99 accord lx 2.3l? Just switch hubs on front and change rear knuckles to a disk n 5 lug??? |
Re: 4 lug to 5 lug conversion
If it works on a 2001 it will work on a 1999. All the same suspension.
|
Re: 4 lug to 5 lug conversion
it should work
|
All times are GMT -8. The time now is 08:31 PM. |
© 2024 MH Sub I, LLC dba Internet Brands