Lower ball joint castle nut cotter pins
What's the proper part #'s for these?
Using the usual online sources (MJ Honda, etc.), there are two part #'s listed for these pins, both different lengths: 94201-30250 PIN, SPLIT (3.0X25) 94201-30450 PIN, SPLIT (3.0X45) I've been to two local Honda dealers and neither claim to stock these. I have to assume I have the wrong part #'s, as I would sincerely hope they're not reusing these pins. I've tried to match these up at the HW stores, but most of them start at sizes much larger than what is on the nut. Incidentally, I had these pins in an order from MJ Honda with a bunch of items, and these never arrived. I'll be calling to find out why, but it's a rather strange coincidence unless these are no longer stocked. |
Re: Lower ball join castle nut cotter pins
Was in Autozone yesterday. What's wrong with using the ones they sell?
|
Re: Lower ball join castle nut cotter pins
Just use whatever fits. Hell, I've used a piece of wire before.
|
Re: Lower ball join castle nut cotter pins
just go to autozone and get some.. as long as they fit they will work. i used a paperclip before......they are a safety feature just in case nut loosens
|
Re: Lower ball join castle nut cotter pins
Originally Posted by Axatax
(Post 47583202)
I've been to two local Honda dealers and neither claim to stock these. I have to assume I have the wrong part #'s, as I would sincerely hope they're not reusing these pins. I've tried to match these up at the HW stores, but most of them start at sizes much larger than what is on the nut.
|
All times are GMT -8. The time now is 08:12 AM. |
© 2024 MH Sub I, LLC dba Internet Brands