Timing belt jump a tooth or two
 

so i was driving along and blamo my 91 si aint going no more... i guess the tensioner broke or cam loose and the belt jumped a tooth or two not sure yet just towed it home and went inside...

my question is do you think i bent some valves or can i just put it back and on the correct tooth and will be good to go? http://images.zeroforum.com/smile/emcrook.gif thanks


[Modified by cl4show, 5:22 AM 10/8/2002]

Re: Timing belt jump a tooth or two (cl4show)
 

I dont thin you should worry about bent valves at all ..Just worry about getting a new belt and tensinor and best of luck

Re: Timing belt jump a tooth or two (Devin17)
 

i dont know if it was the tensioner, i think frozen or broken water pump makes more sence.

i just want to register this car i have a b16 just waiting to go in i feel like im just wasting money on the stock motor

Re: Timing belt jump a tooth or two (cl4show)
 

ok fixed the prod it was the distributor belt did not jump http://images.zeroforum.com/smile/emhammer.gif thanks though