Honda-Tech - Honda Forum Discussion

Honda-Tech - Honda Forum Discussion (https://honda-tech.com/forums/)
-   Honda Accord (1990 - 2002) (https://honda-tech.com/forums/honda-accord-1990-2002-2/)
-   -   How do you force pass. window up '93 accord (https://honda-tech.com/forums/honda-accord-1990-2002-2/how-do-you-force-pass-window-up-93-accord-2991701/)

lastronaut 10-22-2011 01:43 PM

How do you force pass. window up '93 accord
 
My passenger window wont go all the way up, the motor is bad. its down about 1/4-1/2 an inch and rain is getting in. whats the easiest way to force that window up, or what to seal with. thanks

rayo53 10-22-2011 02:00 PM

Re: How do you force pass. window up '93 accord
 
Just put both your palms on the window and have someone push the "up" switch on the door and push it up. Or just push it up, push the button and work your way up. Most Accords do that.

lastronaut 10-22-2011 02:12 PM

Re: How do you force pass. window up '93 accord
 
I just tried that, the window button doesnt do anything when pushed. im putting all my strength into it and trying to get the window up and it wont. im trying to avoid turning this into a huge project. thanks for your input

Smallboxx 10-22-2011 02:28 PM

Re: How do you force pass. window up '93 accord
 
take the door panel off and remove window regulator motor (it has three bolts holding it into the door panel) and then unbolt the regulator (it is the bracket assembly that the motor drives) from the window and ... there u go. slide the window up and figure out how to make it stay up (any way u can)

hondamark35 10-24-2011 03:06 AM

Re: How do you force pass. window up '93 accord
 

Originally Posted by Smallboxx (Post 46225662)
take the door panel off and remove window regulator motor (it has three bolts holding it into the door panel) and then unbolt the regulator (it is the bracket assembly that the motor drives) from the window and ... there u go. slide the window up and figure out how to make it stay up (any way u can)

I've wedged PVC pipe, pieces of wood... whatever i had laying around that was the right hieght inside the door to hold the window shut for a few days while waiting for parts to ship. Used some loops of duct tape or zip ties to secure it and keep it from slipping out while going down the road. :thumbup:


All times are GMT -8. The time now is 05:11 PM.


© 2024 MH Sub I, LLC dba Internet Brands