Turn signals do not work but the flashers do.
 

So like the title states my turn signals do not work but when I use the emergency flashers both of them work. All the fuses have been replaced with new ones so I'm not sure where the problem lies. I'm thinking it has to do with the wiring. If anyone knows what to do or where a wiring diagram is at it'd be much appreciated. Also I'm not sure if this is related but my reverse lights do not work either and the bulbs have been replaced with new ones. So any help would be great :) Thanks.

Re: Turn signals do not work but the flashers do.
 

Check your wiring and also check to make sure your lever for turning your turn signals on is hooked up correctly

Re: Turn signals do not work but the flashers do.
 

All the other lights work, and all the fuses are new and working as stated.

Re: Turn signals do not work but the flashers do.
 

bump

Re: Turn signals do not work but the flashers do.
 

If you hope to get useful replies, then provide all pertinent information about your car and engine:

http://i639.photobucket.com/albums/u...ure_6240-1.jpg

Re: Turn signals do not work but the flashers do.
 

flasher relay

Re: Turn signals do not work but the flashers do.
 

If this were true, neither the blinkers or hazards would work, right?

Re: Turn signals do not work but the flashers do.
 

I would assume so. But my hazard lights do work and all fuses have been replaced with new ones. So I'm thinking a short somewhere then? I don't know though.

Re: Turn signals do not work but the flashers do.
 

i have a feeling the plug or clip just behind the steering wheel is loose but not to a point to where u can see it. unplug it and plug it back in. see if that does anything

Re: Turn signals do not work but the flashers do.
 

make sure ur connection by the plugs are good they tend to short out on eks alot i have took a couple extra harness's from junk yards because mine have been starting to pull apart on me.