P0301, P0302, P1300 1996 D16Y8 220k Miles, How have you fixed it?
1996 Civic Coupe EX, D16Y8 with nearly 220k miles.
code definitions: P0301 No. 1 Cylinder Misfire P0302 No. 2 Cylinder Misfire P1300 Random Misfire ~~EDIT~~ DRY COMPRESSION TEST- 1: 142psi 2: 20psi 3: 20psi 4: 138psi i've tried brand new plugs, brand new wires, newer cap and rotor from my other ek, this stuff called seafoam that you dump into your gas tank which is supposed to clean your injectors and all that crap, premium gas. symptoms: hard to start, gets pretty hot after running, it's been leaking oil for a while now i put a quart in every few days, rough/low idle, dies every once in awhile especially when taken out of a higher gear unless i give it some gas, sounds like it's missing, have to give it a lot of gas to get it going from 1st gear, trouble going up hills, trouble accelerating... anything helps, thanks! |
Re: P0301, P0302, P1300 1996 D16Y8 220k Miles, How have you fixed it?
220K with problems? Get a new engine.
|
Re: P0301, P0302, P1300 1996 D16Y8 220k Miles, How have you fixed it?
yeah i have a y8 with 180k that runs like a champ i'm probably gonna put in if i don't get this GSR
|
Re: P0301, P0302, P1300 1996 D16Y8 220k Miles, How have you fixed it?
does it smoke?
Could be a headgasket. Also is your ignition & mechanical timing good? |
Re: P0301, P0302, P1300 1996 D16Y8 220k Miles, How have you fixed it?
Compression test the cylinders.
|
Re: P0301, P0302, P1300 1996 D16Y8 220k Miles, How have you fixed it?
yes. lot's of blue smoke. forgot to mention that. i was also thinking a blown headgasket
and i will be testing my timing soon. yeah i probably should do a compression test. |
Re: P0301, P0302, P1300 1996 D16Y8 220k Miles, How have you fixed it?
i only tried Seafoam through my gas tank. perhaps i should also try it by mixing it with my oil?
edit: or maybe a vacuum line, from the brake booster? https://honda-tech.com/forums/honda-civic-del-sol-1992-2000-1/guaranteed-way-increase-your-horsepower-10-minutes-seafoam-1502112/ http://www.seafoamsales.com/how-to-u...treatment.html |
Re: P0301, P0302, P1300 1996 D16Y8 220k Miles, How have you fixed it?
Lots of blue smoke leads me to say pistons rings need to be replaced.
When you check the timing, make you sure you the mechanical timing first, than set ignition timing. |
Re: P0301, P0302, P1300 1996 D16Y8 220k Miles, How have you fixed it?
alright, will do.
|
Re: P0301, P0302, P1300 1996 D16Y8 220k Miles, How have you fixed it?
JUST DID A DRY COMPRESSION TEST- 1: 142psi 2: 20psi 3: 20psi 4: 138psi
|
Re: P0301, P0302, P1300 1996 D16Y8 220k Miles, How have you fixed it?
you can thank seafoam for that
|
Re: P0301, P0302, P1300 1996 D16Y8 220k Miles, How have you fixed it?
for what?
|
Re: P0301, P0302, P1300 1996 D16Y8 220k Miles, How have you fixed it?
soo, blown headgasket, right?
|
Re: P0301, P0302, P1300 1996 D16Y8 220k Miles, How have you fixed it?
Originally Posted by Kohen
(Post 45921357)
soo, blown headgasket, right?
|
Re: P0301, P0302, P1300 1996 D16Y8 220k Miles, How have you fixed it?
i'll be putting the new headgasket in, here in a couple days and let you guys know how that goes.
|
All times are GMT -8. The time now is 03:43 AM. |
© 2024 MH Sub I, LLC dba Internet Brands