airesearch/garrett m11 ID help
 

i have a garrett m11 t4 that im having trouble sizing i was wondering if any1 could help me out

inducer larger turbine size is 2 3/4...small is around 1 7/8
hot side large is 2 3/4 ...small is 2 1/4

not much is printed on the inducer housing just says airesearch and has m11 printed on it

i can post pics if it will help anybody ID it
thanks fellers

Re: airesearch/garrett m11 ID help
 

bump

Re: airesearch/garrett m11 ID help
 

you need pics... and you need to physically measure the inducer with a set of calipers... a few mm makes the difference between some wheels