D4 Flashing on 96 Accord | How do I jump the service connector?
I've researched the subject before posting and there are many different answers I found.
The D4 just started flashing on my way home this morning. Car doesn't want to go to second gear, in first it goes fine then once it wants to go to second the speed just drops. I think the tranny might have reached its time, but it may be something else. Found a post about the paper clip method along with the image below, but none of the posts ever mentioned how to actually do this. Will it even work on my 96? I made a thread about PO301 PO302 PO303 error codes a few days ago, could this be linked to that? https://img252.imageshack.us/img252/...shcodes1fj.jpg |
Re: D4 Flashing on 96 Accord
anyone?
|
Re: D4 Flashing on 96 Accord
Took the car out for a 5min drive today. D4 light wasn't flashing, yesterday it was flashing when the car was overheating.
So can anyone help out with the service connector? |
Re: D4 Flashing on 96 Accord
Originally Posted by Chmura
(Post 45326099)
Took the car out for a 5min drive today. D4 light wasn't flashing, yesterday it was flashing when the car was overheating.
So can anyone help out with the service connector? |
Re: D4 Flashing on 96 Accord
Many thanks man!! Will check it first thing in the morning
|
Re: D4 Flashing on 96 Accord
ok bud i just fixed the same problem on my 97 do the paper clip method i got 7 blinks looked at my solenoid like the code said well sure enough it was disconnected urs might be different but look where the code tells ya to my mechanic made me waste 150$ on ecus b4 i did the paper clip
|
All times are GMT -8. The time now is 09:39 PM. |
© 2024 MH Sub I, LLC dba Internet Brands