D16Y7 VTEC ?
once again guys i have the D16Y7.... i hear i can make it Vtec.... what car does the Vtec head i need come from ?? and is it a direct fit to the D16 block ?
|
Re: D16Y7 VTEC ?
Use head from D16Y8 96-00 EX or D16Z6 92-95 Si/EX
|
Re: D16Y7 VTEC ?
https://honda-tech.com/forums/honda-civic-del-sol-1992-2000-1/how-use-honda-tech-search-engine-2588951/
thought I would help before you get flamed or this thread gets closed. |
Re: D16Y7 VTEC ?
Originally Posted by kaiba
(Post 45193644)
Use head from D16Y8 96-00 EX or D16Z6 92-95 Si/EX
|
Re: D16Y7 VTEC ?
No. But search "mini me".
|
Re: D16Y7 VTEC ?
Originally Posted by Skunk2Joe
(Post 45193673)
https://honda-tech.com/forums/showthread.php?t=2588951
thought I would help before you get flamed or this thread gets closed. |
Re: D16Y7 VTEC ?
Originally Posted by kaiba
(Post 45193852)
No. But search "mini me".
|
Re: D16Y7 VTEC ?
Originally Posted by JDMJunkie08
(Post 45193899)
that 's with the D15 block and Vtec head... or does that go for the D16 as well ?
|
Re: D16Y7 VTEC ?
Did any of the write ups say that it DIDN'T bolt up?
|
Re: D16Y7 VTEC ?
Originally Posted by grumblemarc
(Post 45194037)
Did any of the write ups say that it DIDN'T bolt up?
|
Re: D16Y7 VTEC ?
i personally think the z6 head is better. when boosting its easier to tune. y8 head raises compression and does not like alot of advanced timing. its all in preference which one u like. you can run a p28 and a jumper harness or run a p2p civic ex ecu,knock sensor,and you will need to wire vtec on both ecus. many of mini me write ups just search google.
|
All times are GMT -8. The time now is 09:41 PM. |
© 2024 MH Sub I, LLC dba Internet Brands