|
My B20 Build....
10 Attachment(s)
Well it's been a while since I have posted, therefore I decided to make a build thread for my next motor setup which will be a fully Built B20 Vtec all motor. As the days go by I will do my best to post as many pics as I can and give full detail of what my build will consume of. For now it is removing the B16B engine which is a blast to drive, but I wanted more torque! LOL! I started off by removing the engine today this morning and I decided that my next investment will be an engine hoist. It was difficult for me to pull the engine out from underneath with the shitty jack I had. The engine bay will be repainted as well,if anyone is interested i will be selling the car shortly after the motor is built and tuned, I have realized that I have lost interest in Honda's and now it's time for me to move on in life. Please don't ask how much, i will decide when I am done finishing this build. But for now here are a couple pics enjoy..
Cleaned the engine bay and the tranny will try and update as much as i can.... |
Re: My B20 Build....
Love the stance in the last pic/ITR wheels:thumbup:
|
Re: My B20 Build....
Straight Gangstar!.. this is the second EM1 i have seen that is RHD.. ive seen a Milano red and now EBP :)..
|
Re: My B20 Build....
Dont sell it
|
Re: My B20 Build....
I don't know yet...
|
Re: My B20 Build....
9 Attachment(s)
K it has been a while since I posted because I had lost interest in my build but its on once again.... I painted My block,tranny and other things. I actually liked the outcome, they came out good. I was scared that they may of came out shiny I didn't want that. The paint I picked turned out to be very good enjoy...
b20b block Golden eagle Sleeved 86mm, Golden Eagle Head Gasket Golden Eagle Block Guard (Yes I am running a block guard on a sleeved block);) Micro polished Crank ARP Head studs AZ Race& Machine Girdle JE Pistons 11:1 Scat Rods New Oil pan and gasket Fully port and Polished P72 head and 3 angle valve job All Jun Valve train Including Jun type 3 cams Golden Eagle Cam Gears Greddy Timing belt Skunk 2 Intake Manifold, Skunk 2 70mm Throttle Body,Golden Eagle Fuel rail New Type r Oil and Water pump,Walbro 255 fuel pump probably forgetting some things but I will update...... Still need injectors,clutch and a header... I have rc310's but some say they are too small others say it will be fine. Any recommendations are appreciated... |
Re: My B20 Build....
2 Attachment(s)
More pics...
|
Re: My B20 Build....
Looking good. What kind of paint did you use on the motor and tranny?
|
Re: My B20 Build....
good luck man B series is good one too :)
and blue one is exaclty best color for em1 :) |
Re: My B20 Build....
Originally Posted by spoonfedcrx
(Post 45291773)
Looking good. What kind of paint did you use on the motor and tranny?
I went through 4 different cans and finally picked this one- Rust-Oleum 248904 Automotive 12-Ounce High Heat 2000 Degree Spray Paint, Flat Aluminum.Just make sure you prep and do many light coats instead of big coats and let it dry. Just Google that bro. |
Re: My B20 Build....
cant wait to see the outcome of this one. Looks good. ITR 5 lug and wheels on the blue si is freakin priceless.
|
Re: My B20 Build....
5 Attachment(s)
Sorry it's been a while again since I posted, but just got around to painting the engine bay this past Thursday and receiving my manifold back from powder coating. LMK what you guys think thanks....
|
Re: My B20 Build....
looks awesome!
|
Re: My B20 Build....
Great job so far and good luck :thumbup:
|
Re: My B20 Build....
always my favorite color on the em1's, car looks great.....keep it up
|
Re: My B20 Build....
10 Attachment(s)
So my buddy finally got some time to start assembling the motor together, here are some picks of what was accomplished last night. I will do my best to upload as many pictures of the progress.
Any comments are welcome... |
Re: My B20 Build....
New Honda hardware everything was cleaned up before assembling and properly torqued down, at this point I'm getting excited and thanks to my buddy aka (CBR racing) for making this possible.
|
Re: My B20 Build....
Flawless..really nice good job so far.
|
Re: My B20 Build....
good job!!!!
good color!! |
Re: My B20 Build....
Weeewooowaa looking good dude.
|
Re: My B20 Build....
nice work man
|
Re: My B20 Build....
holy shit i didnt even noticed it was rhd till i was lookin at the engine bay lol but good job so far keep it up!!
|
Re: My B20 Build....
9 Attachment(s)
Got the pistons to sit in, looking good now. Got some more goodies and doing a brake job.
|
Re: My B20 Build....
2 Attachment(s)
look what ups dropped off today!!!! so badass...
|
Re: My B20 Build....
3 Attachment(s)
Head studs in....
|
| All times are GMT -8. The time now is 03:31 AM. |
© 2024 MH Sub I, LLC dba Internet Brands