Which Head should i use. ITR/CTR stock vs. B16 worked
ok guys so i recently bent a few valves in my stock b16 head so i am on the look out for another, more powerful, b16 head.. so far i cme across two sweet deals but not to sure what to choose.
Pr3-4 casting itr/ctr internals stock b16 intake manifold and fuel rail. $400 from a local VS. Pr3-3 casting B16 head Blox Intake manifold (identical to ITR manifold) Rocket Motorsports Dual Valve Springs and Titanium Retainers Supertech Black nitrate Coated Valves ITR/CTR cams 3 angle valve job golden eagle fuel rail type r throttle body $600 i thought the second pr3-3 casting head would pu out more horses on my b16 block. which one do you guys think s more powerful? |
Re: Which Head should i use. ITR/CTR stock vs. B16 worked
the second choice hands down. its a good deal. i could take that stuff and make about $1000 off of it. second choice 100%. u want those cams
|
Re: Which Head should i use. ITR/CTR stock vs. B16 worked
I'd go wid the 2nd choice. It's totally worth it. Only $200 more n u get better parts
|
Re: Which Head should i use. ITR/CTR stock vs. B16 worked
The second one. The ITR/CTR heads only have a very mild port job. I'd look into those titanium retainers though. Some are known to be soft and meant for racing only. Fine for their intended purpose, but not durable for a DD.
|
Re: Which Head should i use. ITR/CTR stock vs. B16 worked
thanks guys... now how about
second choice vs. b16 head Ported and polished 3 angle valve job supertech valves, springs, and retainers gsr cams? $500 stock intake, fuel rail, injectors Does the port job really out weigh the second choice? Would the port job in this head really make a big difference? P.S. (NotAJDMFanBoy) looked into it and yeah they are racing retainers.. guy had the head on his gsr boosted and pulled 10k revs |
Re: Which Head should i use. ITR/CTR stock vs. B16 worked
I would go with the ported and polished head with the supertech setup but I would def have it checked out by a machine shop and flowbenched if you can find someone to do that for you.
the ported will make more power if it is a good port job. and you can always find a used blox intake manifold for dirt cheap. |
Re: Which Head should i use. ITR/CTR stock vs. B16 worked
Originally Posted by HondaTom87
(Post 44292763)
I would go with the ported and polished head with the supertech setup but I would def have it checked out by a machine shop and flowbenched if you can find someone to do that for you.
the ported will make more power if it is a good port job. and you can always find a used blox intake manifold for dirt cheap. Thanks for the input.. i also forgot to mention it needs valve seals as well. but thats easy to tackle right? |
Re: Which Head should i use. ITR/CTR stock vs. B16 worked
i would go with pr3-3 with itr cams. gsr cams<itr cams
|
Re: Which Head should i use. ITR/CTR stock vs. B16 worked
Originally Posted by ef8-dc2619
(Post 44292823)
i would go with pr3-3 with itr cams. gsr cams<itr cams
|
Re: Which Head should i use. ITR/CTR stock vs. B16 worked
ALSO THE SECOND CHOICE HAS ON 7K AFTER REBUILD!
|
Re: Which Head should i use. ITR/CTR stock vs. B16 worked
yeh def go with second choice pr3-3. If they ported that other head too much, it will hurt performance for sure(might be too much for ur application) + it needs valve stem seals(easy fix but y deal)
|
All times are GMT -8. The time now is 11:57 AM. |
© 2024 MH Sub I, LLC dba Internet Brands