ITR VTEC engagement = 5K rpms stock?!??
 

Sorry, this is a repost of my thread from the tech section but I'm trying to get all help I can:

Looking at a potential EH3 civic which has a JDM ITR B18C swapped in. Engine, ecu, tranny, etc. is stock ITR according to the seller and he claims to be using the stock JDM P73 ecu.

However, the vtec engagement point on this car is 5K rpms, not the 5.8K or so rpms that I was expecting on a stock ITR setup. Anyone agree with me that this is weird or know cause of this? Anything to do with the car being OBD1 and the engine, ecu, etc being OBD2?

I'd be grateful for any help anyone has...I'm trying to be as thorough as I can in addressing any potential issues before buying the car so advice is really appreciated.

Re: ITR VTEC engagement = 5K rpms stock?!??
 

he got a chipped comp prob look at the ecu u can open it to see if its chipped

Re: ITR VTEC engagement = 5K rpms stock?!??
 

It's chipped or altered in some way shape or form.

No stock p73's have a 5k crossover

Re: ITR VTEC engagement = 5K rpms stock?!??
 

is it possible that the seller is in fact using a gsr ecu, and the tach is off a little?

Re: ITR VTEC engagement = 5K rpms stock?!??
 

Tach would have to be pretty far off considering the 5400 crossover

Re: ITR VTEC engagement = 5K rpms stock?!??
 

oooooo k? why's every one on teh interwebz saying it's a 4400 with iabs opening at 6100? just curious...

Re: ITR VTEC engagement = 5K rpms stock?!??
 

On a stock gsr ecu the vtec crossover is at exactly 5k rpms but not a type r.

Re: ITR VTEC engagement = 5K rpms stock?!??
 

Uhh no. It's at 4400rpm on a B18C GS-R.

Re: ITR VTEC engagement = 5K rpms stock?!??
 

Gsr is 4400rpm, type r is 5400rpm

Re: ITR VTEC engagement = 5K rpms stock?!??
 

cncl, it's 5000 rpm on my Spoon P73 ECU. Looks like a regular ECU but just with Spoon stickers on it.
Maybe you got a spoon ECU without stickers.
Dunno, jus sayin'.

If so, you should have a higher redline and no speed cut.

Re: ITR VTEC engagement = 5K rpms stock?!??
 

First, assume they paid for the work to be done and they have no clue. Second, it probably is running a chipped OBD I ECU since the chassis is OBD I. Third, potentially the tach is off.