Honda-Tech - Honda Forum Discussion

Honda-Tech - Honda Forum Discussion (https://honda-tech.com/forums/)
-   Acura TL, RL & ZDX (https://honda-tech.com/forums/acura-tl-rl-zdx-17/)
-   -   p1399 code (https://honda-tech.com/forums/acura-tl-rl-zdx-17/p1399-code-2783401/)

92civicx 05-28-2010 02:37 PM

p1399 code
 
hello guys i'm tryin to figure out wuts wrong with my friends car. i already changed a ect sensor and changed spark plugs after getting a missfiring in cylinders 1,3,and 5. erased all those except for p1399 code.

the car shakes at random times and it sounds the like the manifold makes a hming noise like from a stereo which is weird and thats all i gottta go by. does anyone kno what i should look for?

tranny fluid is low
engine oil looks really dirty
one of the cables on the throttle isn't their.

and i don't think i'm leaving anything out lmk if u guys have any ideas. on where to pin point this problem thnx

slomofo 05-28-2010 04:36 PM

Re: p1399 code
 
Sounds like you have a vacuum leak.

Grab a can of carburator cleaner and spray around the intake manifold area with the car running. If the idle surges, you've found your leak.

Targa250R 05-28-2010 05:00 PM

Re: p1399 code
 
P1399 is a temporary code for multiple misfires and is usually not listed in the manuals. What year and model is the car and have you run a compression test and checked the timing? If this is a J-series V6, have you checked the valve lash?

92civicx 05-30-2010 10:17 AM

Re: p1399 code
 
its a 2001 tl 3.2 l the j series v6 vtec. today i'm gonna do a valve adjustment and do a compression test, but how do i check timing, i got a timing gun but how do i do so without a dizzy ?

92civicx 05-30-2010 11:12 AM

Re: p1399 code
 
would the car b ticking if it needed a valve adjustment >?

Targa250R 05-30-2010 11:21 AM

Re: p1399 code
 
Usually, but not necessarily. A loose valve will tap, but a tight valve won't. The exhaust valves are known to tighten up while the intake valves loosen up in these engines.

By timing, I meant camshaft timing.

92civicx 05-30-2010 11:37 AM

Re: p1399 code
 
aright thnx man that was a big help i'll let u kno how it goes....

kwahamot 08-09-2010 04:50 PM

Re: p1399 code
 
I had this problem...turned out it was the intake manifold leaking, but I couldn't tell with the carb cleaner test. I had to do a smoke test.

CD_Ridge 08-21-2010 05:42 PM

Re: p1399 code
 
We had this code plus other misfire codes for specific cylinders. The problem was that the ignition coil pack for the #6 cylinder had failed. After the coil pack was replaced, runs as good as new.
CD


All times are GMT -8. The time now is 06:56 AM.


© 2024 MH Sub I, LLC dba Internet Brands