Ef hatch front lip question
Will a front lip from a crx fit on an ef hatch? Ive been told yes, and no, and just want to know the REAL answer. I know the crx has those "cubbys", or indents for fogs, and thats not what Im worried about, I can always dremel those off. Im just talking size wise. Are the bottoms of the bumpers both the same size?
I have a 91 si, and the oem lip is nice, but I want something aggressive. And I can find more options for a crx bumper than an ef... Thats why Im asking And on that note, if they wont fit on my bumper, does anyone know of a good place to find a lip for my ef? Theres always the going other manufacturer's route (v dub, volvo, renault) to get an aggressive lip, but I kinda wanted to keep all my parts in the honda family... Any input would be great:hugs: |
Re: Ef hatch front lip question
I'm rocking the volvo lip on my ef. Don't know about your question though, sorry.
|
Re: Ef hatch front lip question
u can use a poly rep mugen lip for a eg hatch or modify the rep j's racing
|
Re: Ef hatch front lip question
if u use an eg lip u must cut it down... thats what i did and doesnt look half bad either... but as for the question... after i cut my eg front lip i traded my 90 crx for a 89 hatch and it didnt fit the front bumper it was too long... but now i have a 90 si and the lip fits the front bumper just fine... im not gonna say im 100% but as long as u have a lip from a 90-91 crx it should fit lengthwise...
|
Re: Ef hatch front lip question
So an Eg lip will fit? I have one of the rep mugen style. Ive test fitted it, and pondered at the possibility of makin it work. Do you have a pic of how yours fits? Curious as to how to cut it down. Did you attach it from the bottom? or did you drill at the bottom of the grille opening...
Ive seen the volvo lip, its very similar to the mark III jetta/golf lip. Looks great, but the volvo lip I cant find... have a website I can order it at? Or is it a dealer part |
Re: Ef hatch front lip question
you could make it fit but u would have to modify it to much of a hbassle sometimes,i my self is rocking a da front bumper n lip on my 88ef9 hatch fits dope but i need to adjusted a bit
|
Re: Ef hatch front lip question
need to clarify the lip is an mk3 vw lip bolts right on no cutting lol sorry for that
|
Re: Ef hatch front lip question
Originally Posted by kiddef9
(Post 42240523)
need to clarify the lip is an mk3 vw lip bolts right on no cutting lol sorry for that
|
Re: Ef hatch front lip question
heres a pic of my eg lip... i dont have a pic of it on my hatch yet but this is on my crx... i had decided to cut the lip in the middle and leave the regular mounting tabs on the ends... i also plan to fiber glass the middle and make it look like it was never cut but thats when i stop being lazy...
this is actually the best picture i have of it and how it was mounted http://i326.photobucket.com/albums/k...3/IMG_0013.jpg heres one of the whole car http://i326.photobucket.com/albums/k...3/IMG_0017.jpg |
Re: Ef hatch front lip question
Just throwing it out their but have u looked into the first gen integra lip? Fits good too. Just have to shorten the ends up.Works good for me.
|
Re: Ef hatch front lip question
CHeck out these two lips.
They are hookers. Sexy and expencive. http://www.chargespeed.com/photo/ext-force/Scan55.jpg http://www.chargespeed.com/photo/ext-force/Scan56.jpg |
Re: Ef hatch front lip question
Originally Posted by kiddef9
(Post 42240523)
need to clarify the lip is an mk3 vw lip bolts right on no cutting lol sorry for that
Originally Posted by 89LSED
(Post 42244990)
CHeck out these two lips.
They are hookers. Sexy and expencive. http://www.chargespeed.com/photo/ext-force/Scan55.jpg http://www.chargespeed.com/photo/ext-force/Scan56.jpg Ive seen your post about the Rep Chargespeed wing.... Get it. |
Re: Ef hatch front lip question
2 Attachment(s)
got a 1st gen da lip on my hatch i think it looks great, just had to trim the ends down a little.
|
Re: Ef hatch front lip question
on the red crx it looks cut in the middle?
|
Re: Ef hatch front lip question
did you have to cut it there to fit or what
|
Re: Ef hatch front lip question
that DA lip dont look bad on the bumper. i that bumper so bad
|
Re: Ef hatch front lip question
lol sorry guess i missed the post above the picture , i needed my 5 posts anyways thanx :) looks sexy though
|
Re: Ef hatch front lip question
well a 89 ef bumper that is
|
Re: Ef hatch front lip question
91 crx lip on 91 EF front..purchased for $10 at junkyard (faded) painted with trim paint and purchased washers and bolts on home depot..total=$14...pic...oh yeah no trimming needed =)
http://i78.photobucket.com/albums/j8...n/Photo062.jpg http://i78.photobucket.com/albums/j8...n/Photo063.jpg |
Re: Ef hatch front lip question
Originally Posted by efkylecrx
(Post 42250319)
lol sorry guess i missed the post above the picture , i needed my 5 posts anyways thanx :) looks sexy though
|
Re: Ef hatch front lip question
so did u decide on a lip bro?
|
front end
2 Attachment(s)
just to clarify, yes you can use a 90-91 crx si front bumper or swap the whole front end on, no cutting needed. i helped a freind do the conversion on his 91 si hatch, we swapped the whole crx front end onto his damaged hatch, and swapped the damaged hatch parts over to the parts car crx. find one with a factory lip, and you get 2 birds with one stone. :thumbup:
heres a pic of my 91 crx si front and rears, just for kicks. i love it, needs painted though lol these pics are from the first day i got the car, so pardon the shitty paint lol and i STILL need a lip... Attachment 124729 Attachment 124730 |
Re: Ef hatch front lip question
Originally Posted by kiddef9
(Post 42276668)
so did u decide on a lip bro?
1. Volvo 2. Jetta/Golf MkIII 3. DA Everyones input, Is slowly helping me decide. Thanks guys... |
Re: Ef hatch front lip question
Originally Posted by Lennart89
(Post 42252901)
91 crx lip on 91 EF front..purchased for $10 at junkyard (faded) painted with trim paint and purchased washers and bolts on home depot..total=$14...pic...oh yeah no trimming needed =)
http://i78.photobucket.com/albums/j8...n/Photo062.jpg http://i78.photobucket.com/albums/j8...n/Photo063.jpg |
Re: Ef hatch front lip question
Originally Posted by mayniak
(Post 42298408)
wish i had that lip lol, i found a DA lip for 2 bucks at the junkyard as well
|
All times are GMT -8. The time now is 08:55 PM. |
© 2024 MH Sub I, LLC dba Internet Brands