|
November FS Sticky
Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD
1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts! 2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it. 3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned 4) NO WTB ADS! 5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE 6) Please provide all pertinent information, including price, and try to return pm's. We will delete any BS we feel does not belong in here Please try and limit the size and # of pictures you post. using thumbnails would be fantastic. From this point on, 11-16-2009, any edit to these threads, will result in sanctions. if it persists, the stickies will disappear for good. |
Re: November FS Sticky
FJO Injector Driver ($150)
http://i169.photobucket.com/albums/u...ctorDriver.jpg 3” SS Exhaust [Custom] w/ Vibrant muffler ($350 picked up) Made by Tempest Racing came off a '97 civic http://i169.photobucket.com/albums/u.../100_15281.jpg http://i169.photobucket.com/albums/u.../100_15301.jpg Please pm me with any question or offers. Paypal fees not included, shipping is negotiable. |
Re: November FS Sticky
sold
|
Re: November FS Sticky
Mint set of 16'' Drag dr-16's. only used on the dyno, maybe 25miles on them, maybe.
fronts are falken azenis 225/50/16 rears are falken ziex 512 205/55/16 $500.00 http://i173.photobucket.com/albums/w...sync/009-2.jpg http://i173.photobucket.com/albums/w...sync/020-3.jpg http://i173.photobucket.com/albums/w...sync/030-1.jpg http://i173.photobucket.com/albums/w...sync/033-2.jpg http://i173.photobucket.com/albums/w...sync/036-1.jpg http://i173.photobucket.com/albums/w...ngsync/043.jpg http://i173.photobucket.com/albums/w...ngsync/047.jpg |
Re: November FS Sticky
precision injectors 1200cc $240
Exile MSBC brand new in the box $400 Or willing to trade for a 4" aluminum exhuast for eg hatch but it must go over the control arm http://i149.photobucket.com/albums/s...oller1_lrg.jpg |
Re: November FS Sticky
i have a few things sitting around the garage that i am tired of looking at. all prices include shipping but does not include paypal fees.
1.) 750cc precision injectors. 200 shipped. one of them needs a new rubber oring. 2.) h22 drag manifold. 125 shipped. 3.) tial 35mm watsegate. 150 shipped. SOLD 4.) JE 9:1 h22 pistons 400 stock bore. pins included. brand new never used. coated by calico coatings teflon on the sides and nitrile on the tops (they were installed on my sleeved block but never ran on. so the rings are on the pistons and maybe could work, but i would recommend new rings.) 5.) old school drag intercooler. 100 shipped dimensions are 22x 6.5 x 2.5in. 6.) T3 60-1, 400 shipped, only has 2k miles on it. SOLD 1.) http://i128.photobucket.com/albums/p.../injectors.jpg 2.) http://i128.photobucket.com/albums/p...a/manifold.jpg http://i128.photobucket.com/albums/p.../manifold2.jpg 3.) 4.)http://i128.photobucket.com/albums/p...da/piston4.jpg http://i128.photobucket.com/albums/p...nda/piston.jpg http://i128.photobucket.com/albums/p...da/piston2.jpg 5.) http://i128.photobucket.com/albums/p...ntercooler.jpg |
Re: Gotta sell my '91 CRX drag car!
http://s976.photobucket.com/albums/a...urrent=028.jpg
Rolling car with three K motors, two brand new clutch's, new axles, certified Chromoly cage, new lexan, fresh GearSpeed tranny with spool, new fuel cell, new lexan, tons and tons of parts, One piece glass front end, doors and hatch, so much stuff I cant list it all. Bring a trailer for the car and a truck for the parts. Fenders, doors, lights, etc. etc. etc $4900 Call Lucky at 714 342-6485 |
Re: November FS Sticky
Willing to Part Out but need to sell a majority of parts first, I will start a list of items and will take deposits once I have tore car apart. Need to sell 92 Civic Coupe,LS V-TEC, Golden eagle sleaved 84mm, Arias pistons and Eagle rods. LS Crank micropolished, JG Pro series head w/Valves, springs and retainers, Garrett Turbo, Innovative Solid Motor Mounts, Fluid damper Crank Pully, Golden Eagle Cam Gears, 1 gallon Fuel Cell w/SX Black Pump and Filter, Bosch 1600 cc injectors, Custom Intercooler Piping, Custom Intercooler, JG Manifold, DSS Axles, B16 Hydro trans w/Pro Drive Spool, Clutch Specialties Clutch and Flywheel, Koyo Aluminum Radiator, Custom Stainless Rad Hoses, CNC Brakes and Clutch pedals w/resivoirs, custom brake lines, Full cage w/cert to 8.50, Wheelie bar and chute, Full F.A.L Window kit, 1 piece front end, fiberglass doors, dash and trunk lid, All interior sheet metal and front wheel housing, Custom Paint and airbrushing, Weld Drag 15 x 8 front on MT 26in slick and front Apex coil overs, rear susp is (Ron Lumas) Strange rear strut w/250lb spring (needs 80lb) all aluminum radius rods w/hyme joints and fully adjust. the susp and rear wheels in pix are no longer on vehicle, rear wheels now are Bogart Spindle mounts. DFI Engine Management w/Msd Dig7, MSD 2 step, quick release steering wheel and window net. Car runs consitant 10.50 and is turn key ready to race and trailer is a Carson Racer 20 foot, custom air brush on rear gate. 6 tie downs. $10k for car only, $12.5 car and trailer, price is firm, email for additional info.
http://i936.photobucket.com/albums/a...joe01/0142.jpg http://i936.photobucket.com/albums/a...ntanaIDRC1.jpg http://i936.photobucket.com/albums/a...eytuned022.jpg http://i936.photobucket.com/albums/a...ontanaIDRC.jpg http://i936.photobucket.com/albums/a.../tattoo036.jpg http://i936.photobucket.com/albums/a.../tattoo038.jpg http://i936.photobucket.com/albums/a.../tattoo034.jpg http://i936.photobucket.com/albums/a.../tattoo035.jpg http://i936.photobucket.com/albums/a.../tattoo033.jpg http://i936.photobucket.com/albums/a.../tattoo032.jpg |
Re: November FS Sticky
Aeromotive Eliminator, used about 250 miles: $300
Aeromotive FPR with -10 inlets: $100 BorgWarner S374 with 1.25 exhaust housing and race compressor cover. 250 miles on it and a handful of dyno pulls. Perfect condition, asking $1300 OBO. Bought from VPFab about a year ago for $1600. http://www.geektuned.com/Media/Pictu...3081559-02.jpg |
Re: November FS Sticky
M&W pro10 ignition box. set up for falling edge ignition--$300
Rywire brand new obd2-a to obd2b conversion harness-$75 http://i34.photobucket.com/albums/d1...4/th_MW001.jpg http://i34.photobucket.com/albums/d1...4/th_MW003.jpg http://i34.photobucket.com/albums/d1...kysswap008.jpg |
Re: November FS Sticky
FS: M&W Pro 12 ignition (BRAND NEW)
$450 obo http://img.photobucket.com/albums/v2...e/DSC05131.jpg http://img.photobucket.com/albums/v2...e/DSC05133.jpg |
Re: November FS Sticky
Everything has under 1000 miles on it
350$ PFAB log manifold w/ T3 Flange selling with downpipe AC and PS compatible http://i285.photobucket.com/albums/l...o/DSC02746.jpg http://i285.photobucket.com/albums/l...o/DSC02749.jpg http://i285.photobucket.com/albums/l...o/DSC02750.jpg 230$ Tial 38mm Waste Gate w/gasket and dumptube http://i285.photobucket.com/albums/l...o/DSC02751.jpg http://i285.photobucket.com/albums/l...o/DSC02752.jpg 50$ Gm 3 bar map sensor with pigtail http://i285.photobucket.com/albums/l...o/DSC02761.jpg http://i285.photobucket.com/albums/l...o/DSC02762.jpg 240$ Rc engineering 750cc injectors 50$ silver BDL fuel rail http://i285.photobucket.com/albums/l...o/DSC02767.jpg http://i285.photobucket.com/albums/l...o/DSC02767.jpg 300$ JE 81mm 9:1 pistons that need rings 200$ B16 Eagle rods w/ big rod bolts $450$ for pistons and rods http://i285.photobucket.com/albums/l...o/DSC_0158.jpg http://i285.photobucket.com/albums/l...o/DSC_0160.jpg http://i285.photobucket.com/albums/l...o/DSC_0162.jpg http://i285.photobucket.com/albums/l...o/DSC_0164.jpg 200$ clutchmasters stage 3 clutch http://i285.photobucket.com/albums/l...o/DSC_0165.jpg http://i285.photobucket.com/albums/l...o/DSC_0166.jpg http://i285.photobucket.com/albums/l...o/DSC_0167.jpg |
Re: November FS Sticky
I have a used SX 18201 Fuel Pump w/ 41001 Fuel Filter. Worked great before I took it off the car a few months back. Taking offers...
http://i492.photobucket.com/albums/r...u990/012-3.jpg http://i492.photobucket.com/albums/r...ulu990/021.jpg http://i492.photobucket.com/albums/r...ulu990/025.jpg The 18201/18203 EFI and Carburetted Alcohol Compatible Electric Fuel Pump Here is some info on it: Aerospace Engineered and Manufactured Supports up to 1,300 HP Maximum Tuning Flexibility Compact & Lightweight Designs Quick & Easy to Install The 18201 Electric Fuel Pump is the industry leader in it's class. Designed for both EFI and carburetted applications, the 18201 can support up to 1500 HP with a single pump. Flow tested to deliver 2.4 GPM at 0 PSI to 0.7 GPM at 90 PSI at 12 volts. The 18201 is well suited for normally carburetted and blow through systems, and is excellent for mid range domestic and import applications. It also passes UL Standards for Coast Guard Approval in marine applications. The industry leader in it's class. Designed for both EFI and carburetted applications, the 18203 can support up to 1,300 HP with a single pump. Flow tested to deliver 2.4 GPM at 0 PSI to 0.7 GPM at 90 PSI at 12 volts. The 18203 is well suited for normally carburetted and blow through systems, and is excellent for mid range domestic and import applications. It also passes UL Standards for Coast Guard Approval for use in marine applications. Make no mistake about it, SX Performance™ has created the most reliable fuel pump in the world today that handles high pressure/high volume fuel systems up to 1,300 HP at 45 PSI. So no matter what you're running, our pump alone lets you switch between carburetted and fuel injected systems simply by changing the regulator. When a thousandth of a second can win a race, you need a total fuel system with consistent and reliable performance, run after run. You need a manufacturer with decades of proven flow and pressure experience. You need SX Performance™. |
Re: November FS Sticky
I have a used Haltech E6K w/ Harness. Still in great condition. Taking offers (maybe $600).
http://i492.photobucket.com/albums/r...u990/011-4.jpg http://i492.photobucket.com/albums/r...u990/010-3.jpg |
Re: November FS Sticky
kseries parts. sorry these pics were taken for over at k20a.org figured i'd use them here
precision 1000cc injectors off my turbo kseries just got cleaned and flow tested $250 shipped http://i304.photobucket.com/albums/n...g/IMGP3203.jpg ATS kseries 5.0 final drive ring gear and shaft $230 shipped. http://i304.photobucket.com/albums/n...s/PICT0087.jpg base rsx 5spd trans. unknown condition car had 56,xxx miles on the clock $450 plus shipping http://i304.photobucket.com/albums/n...s/PICT0110.jpg 2 walbro 255 intanks fuel pumps one with 700 miles the other with only 4 passes $100 for both shipped or $60 each shipped gm 3bar map sensor $30 shipped |
Re: November FS Sticky
3 Attachment(s)
Exedy Twin Disc for B-series Hydro tranny..Brand new discs comes complete...800obo
|
Re: November FS Sticky
FS:Used Turbo kit
-Full-Race ram horn manifold ($600.00) -Garrett turbo T3/67 (prob 30-40 passes on it) great turbo ($500.00) SOLD!!!! -3in Full-Race down pipe ($250.00) -TIAL 44mm waste gate (with dump tube) ($350.00) -S-Max big core intercooler (brand new, NO INTERCOOLER PIPING) ($300.00) -3in custom full exhaust with Borla XR-1 muffler ($300.00) -TIAL blow off valve ($200.00) (this turbo kit on my car ran a 10.5 @140mph SFWD car) was on a ls/vtec set up has more in it, made 600+hp... $2000.00 for this turbo kit... pix will be up soon...... email me @ boostedeg@yahoo.com or pm me...... I am willing to part out (prices are listed) or you can buy the whole kit at a cheaper price.. pick up only, will ship at buyers expense....... I also have: Precision 825hp intercooler brand new in box ($500.00) Inlinepro cast iron log turbo manifold for T3 or T4 turbos brand new in box ($400.00) |
Re: November FS Sticky
K series
competition clutch twin disc. $1200 BRAND NEW! http://i25.photobucket.com/albums/c5.../Twindisc2.jpg Oil pan with welded -10 bung $100 -Injector dynamics 1000cc injectors $400 or $420 with obd1/ev1 adapters http://im1.shutterfly.com/media/47b9...D550/ry%3D400/ -Circuit werx hubs w/ studs includes civic knuckles and new honda wheel bearings and ball joints $450 http://im1.shutterfly.com/media/47b9...D550/ry%3D400/ http://im1.shutterfly.com/media/47b9...D550/ry%3D400/ -HAsport EGk1 motor mounts $400 http://im1.shutterfly.com/media/47b9...D550/ry%3D400/ -Polished lenso vpd’s (scratched from on the inside from manufacture) with m&h 25’s (9 passes on them) $500 http://im1.shutterfly.com/media/47b9...D550/ry%3D400/ http://im1.shutterfly.com/media/47b9...D550/ry%3D400/ -(new)AEM EMS for kswap cars $1200 http://im1.shutterfly.com/media/47b9...D550/ry%3D400/ -AEM 3.5 bar map sensor $100 http://im1.shutterfly.com/media/47b9...D550/ry%3D400/ -(new)Eagle rods $250 -(new)Wiesco pistons 9:0:1 86.5 $450 -(new)Cometic MLS gasket $75 http://im1.shutterfly.com/media/47b9...D550/ry%3D400/ -PWR radiator $175 http://im1.shutterfly.com/media/47b9...D550/ry%3D400/ |
Re: November FS Sticky
PARTING OUT! Everything has 40 miles on it. All in "new" condition
-Peakboost Topmount manifold (T3, single 44) $900 - Garret GT35R turbo with .63 a/r exhaust housing (4bolt to vband adapter included) $1000 - Peakboost 3 to 4 inch Downpipe with EGT port in pipe (Vband) -$350 - GT series water lines -$150 - Oil feed and return (-10 return all stainless) -$65 - Garrett core intercooler -$300 - Peakboost charge pipe kit with all couplers and clamps - $200 - Tial 50mm BOV Silver - $175 - Tial 44mm WG Silver (Vband dumptube included) - 275 - Delphi 1000cc Injectors -$250 - AEM 1040 EMS -$500 - AEM injector Driver $150 - Golden Eagle Vacuum block - $35 - Mfactory oil sandwich plate -$50 - BandR Catch can with VC and block fittings. Brand new only assembled - $500 -M&H 24.5x8.5x15 slicks with 10 passes - $275 ALL PRICES NEGOTIABLE I think thats everything. No wait from peakboost, just buy it all, and put it on your car. Again, this stuff is all in NEW condition and has NO PROBLEMS. Pics on my car http://i25.photobucket.com/albums/c8...nut11/bay3.jpg http://i25.photobucket.com/albums/c8...nut11/bay4.jpg http://i25.photobucket.com/albums/c8...nut11/bay5.jpg http://i25.photobucket.com/albums/c8.../bumperoff.jpg http://i25.photobucket.com/albums/c8...ichaelbay2.jpg http://i25.photobucket.com/albums/c8...urbodown-1.jpg http://i25.photobucket.com/albums/c8...1/CIMG3284.jpg http://i25.photobucket.com/albums/c8...1/CIMG3286.jpg http://i25.photobucket.com/albums/c8...1/CIMG3287.jpg http://i25.photobucket.com/albums/c8...1/CIMG3290.jpg http://i25.photobucket.com/albums/c8...1/CIMG3291.jpg http://i25.photobucket.com/albums/c8...1/CIMG3300.jpg http://i25.photobucket.com/albums/c8...1/CIMG3302.jpg http://i25.photobucket.com/albums/c8...1/CIMG3306.jpg http://i25.photobucket.com/albums/c8...1/CIMG3305.jpg |
Re: November FS Sticky
fully built long block GSR with b16 head $4500 this motor made 980whp.
95 GRS long block it has about 90000miles $1100. NEW 85mm RS pistons with rings $200. B- series NEW skunk2 stage 1 cams $350. B-series used skunk2 stage 2 cams $300. NEW skunk2 B-series SRINGS and RETAINERS $250. NEW BLOX 76mm throttle body $220. 93 civic The CircuitWorx Stage 2 drive AXLES, HOPS, INTERMEDIATE SHAFTS AND SPOOL. $1000. simpson Parachute $200. STRANGE drags 800 rear, 550 fronts coil overs $1000. LSL T4 Twin Scroll Manifold $500 Tial 50mm bov $ 200 4" Down Pipe $100. 4" core intercooler 3" IC piping $500. DriveTrain: NEW G-FORSE Dog Box transmission gears 2.92 1.88 1.43 1.12 with 2 final drives 4.0 and 4.73 $4000. hyro Tilton twin disc clutch with only 5 passes $900. cable Tilton twin disc clutch it only seen dyno $900. 95mm eagle crank $350. NEW 95MM crower cranks $450. call at 619 278 8337 ask TB. . |
Re: November FS Sticky
im parting out my Spfwd car due to finace issues coming up(a baby). just went 9.96@153 at englishtown with these parts. the car also made 750@34 pounds on a mustang dyno with this set-up. add 3% for paypal and buyer will pay shipping fees. have some pics of most of the things if not they will be posted in a couple days.
Golden eagle polished fuel rail $90 Precision 1200cc injectors $250 Magnafuel fuel pressure regualtor $150 Fluydine radiator and slim fan $275 Generic intake manifold gasket(gsr) $30 Omnipower drag suspension(18k rear-12k front) $750 4 inch aluminum exhaust $450(perfer local pickup) G-force transmission(hydro input shaft) $4400 G-force cable spline input shaft $350 Rear t-bracket (gsr) $50 integra shift linkage and skunk2 shifter $100 http://i87.photobucket.com/albums/k1...ysstuff001.jpg http://i87.photobucket.com/albums/k1...stuff056-2.jpg http://i87.photobucket.com/albums/k1...stuff057-1.jpg http://i87.photobucket.com/albums/k1...stuff059-1.jpg http://i87.photobucket.com/albums/k1...ysstuff060.jpg http://i87.photobucket.com/albums/k1...ysstuff062.jpg http://i87.photobucket.com/albums/k1...stuff020-1.jpg http://i87.photobucket.com/albums/k1...stuff019-1.jpg http://i87.photobucket.com/albums/k1...stuff053-1.jpg http://i87.photobucket.com/albums/k1...stuff049-2.jpg http://i87.photobucket.com/albums/k1...stuff049-1.jpg http://i87.photobucket.com/albums/k1...ysstuff010.jpg |
Re: November FS Sticky
aebs head stud kit b series
used mint condition sold off a spare motor. http://i35.photobucket.com/albums/d1...g/CIMG0498.jpg 60.00 shipped billet 6061-t6 v band kit w/ oring 2.5" http://i35.photobucket.com/albums/d1...s/CIMG0378.jpg 35.00 billet 6061-t6 v band kit w/ o ring 3" http://i35.photobucket.com/albums/d1...s/CIMG0377.jpg 40.00 b series twin scroll manifold w/ twin wastegates t flanged NEW accepts tial 44 wg or equivalent v band type wg. all flanges are belt sanded to seal properly http://i35.photobucket.com/albums/d1...g/DSC01762.jpg 800.00 ramhorn manifold for bseries complete back purged manifold sch10, t3 flanged and accepts a tial 44mm wg. only used for mock up fits great and brand new http://i35.photobucket.com/albums/d1...g/CIMG0489.jpg 600.00!!!!lower price top mount manifold b series. NEW b series top mount for t3 and t4 turbine housings. has both bolt patterns for turbine applications. accepts single tial 44mm wg. http://i35.photobucket.com/albums/d1...g/CIMG0488.jpg 750.00 golden eagle b16/ls manifold w/ accufab 90mm tb with v band clamp attachment. this is a ge intake manifold with a 90mm accufab tb. 90mm tb flanged already welded comes with everything, gaskets, v band, tps sensor, ge billet blk anodized polished f rail, ported runners. everything is setup and no need to fabricate anything to make this work. oem throtle cable will work. 1000.00 + into this manifold. willing to part out 400.00 manifold, 80.00 rail w/ guage, 350.00 tb with vband. http://i35.photobucket.com/albums/d1...g/CIMG0491.jpg http://i35.photobucket.com/albums/d1...g/CIMG0494.jpg http://i35.photobucket.com/albums/d1...g/CIMG0496.jpg 700.00 takes it all TURBO OIL FEED/EVAC KIT -comes with everything you need for your turbo http://i35.photobucket.com/albums/d1...tems/turbo.jpg $115.00 shipped. T1 catch can mint cond, comes with 2 -10 caps all fittings are -10 and has drain backs to block for easy mant. free opperation http://i35.photobucket.com/albums/d1...g/CIMG0495.jpg 175.00 FCS clutch line kit. this kit is for clutch master to slave. eliminates all the oem lines to the slave. looks really nice. comes with 2 fittings and ss line with clear jacket. http://i35.photobucket.com/albums/d1...s/CIMG0009.jpg http://i35.photobucket.com/albums/d1...s/CIMG0112.jpg 65.00 shipped FCS brake line kit new in the bag with clips,bolts,washers,etc. lines comes with mounts and a clear jacket to cover the ss braided line. fits civic/integra, ek, da, em very nice. sells for 139.00 just removed it to take pictures. http://i35.photobucket.com/albums/d1...s/CIMG1830.jpg 90.00 shipped 1/4" d.o.t. air brake push lock vaccum / boost kits everything you need to plum your turbo or vaccum lines. stainless steel fittings with high temp high impact d.o.t approved fittings and firestone d.o.t air brake lines. plum your twin wastegates, boost solenoid, b.o.v, fpr, boost ref, and vacuum all in one package http://i35.photobucket.com/albums/d1...s/CIMG0010.jpg 95.00 SHIPPED please pm me or if you need immediate response since this sale thread is first come first serve, please email me or aim hellomrparks@yahoo.com aim: jparks8832 |
Re: November FS Sticky
wats good im selling a legit(papers) 97 fully built b20 block, has no more than 800-1000 miles..was properly broken in..only saw dyno and track..was neva driven on the streets,(which this setup could be daily'd with no problem with the proper tune)..all machine work was done by Bob's Speed Shop in Harrison.Motor mad 230hp/160 torque with a b16 head and skunk 2 pro 2's..tuned by Cunha clm motorsports ..there is nothing absolutely wrong with it..goin diff route..any1 can vouce for me and my parts..i could be forgettin detail but feel free to ask me anything and dont be afraid to make an offer
Located Union City,nj 07087 built type-r tranz.. soldd!!!!! ~Type R shift linkage with chrome shifter..100 obo ~obd 1 aem in box with cable,Model # 30-1000..still has warranty wit aem...pm me with a decent offer ~ACT stage 5, ,extreme pressure plate and six puck sprung and oem shaved type r flywheel..paid 550 for it ..only has 7 passes on the track..askn 350 obo ~bseries.after market mounts for eg or teg..sold ~bseries starter..40obo ~2 sets of bseries stock axle's..70 (sets only) ~bseries midshaft..best offer ~beseries rear tranny T bracket..for eg or teg..best offer ~specs.. 84.5 mm,decked,hot tanked,cleaned in and out 12.5 Cp light weight pistons Golden eagle rods Acl race bearings, whole bottom end 89mm new ls crank Gates timing belt New timing tensioner Unorthodox racing crank pulley ls water pump Shimmed Type-r oil pump obd 1 alternator oem oilpan all gaskets are from honda dealer ill also include the head gasket which is still fresh,but i personally would change it.. I spent a lil over 2500 on this i have receipts for everything .. solddd. ~MSD digital 6 box, msd distributor cap, msd external coil(the new model not the shity old style canister), and ill include the button for the 2step.. 200 ~New Bseries Skunk 2 pro3's with Endyne Cam gears,(neva had the chance to intall)... SOld!!!!!!!! ~Latest Version Rmf headers already heat wrapped...Sold ~Rc 440 obd1 injectors..Sold Tato Built |
Re: November FS Sticky
LOCATION: Long Island
asking $500 Greg pm for pics if needed... its a p30 with a brand new s300, will provide ANY base map for free.. pm me for details asking $500 http://i146.photobucket.com/albums/r...Y2628/p305.jpg http://i146.photobucket.com/albums/r...Y2628/p303.jpg http://i146.photobucket.com/albums/r...Y2628/p304.jpg http://i146.photobucket.com/albums/r...Y2628/p302.jpg |
| All times are GMT -8. The time now is 05:46 AM. |
© 2024 MH Sub I, LLC dba Internet Brands