b series transmission to engine block bolts
 

alright so ive been to honda and acura and i have even talk to the honda distribution center. I need the part numbers for the transmission housing to engine block bolts that attach the tranny to the engine... im guessing all of the b series are probably the same considering they are all interchangeable but for sake of the post im using a b16a2 si tranny on a obd1 ls block. thanks a head of time... this is literally holding up the whole project.

ive been to autozone, kreagen etc etc.... they say to go to honda or acura directly.

Re: b series transmission to engine block bolts
 

yes, get honda bolts. they are called bellhousing bolts.
just find someone at the parts counter that isn't stupid.

Re: b series transmission to engine block bolts
 

ok so go to honda and not acura and ask for bellhousing bolts, thanks a bunch!

Re: b series transmission to engine block bolts
 

honda/acura. whatever. just B series. about 3.5 or 4" long.

Re: b series transmission to engine block bolts
 

http://www.hondaautomotiveparts.com/...13S020_E06.gif

if you go to honda its #33. under ALTERNATOR BRACKET-ENGINE STIFFENER

90051-PE0-000 BOLT, FLANGE (12X70) 3 of those. one of the starter bolts also hold it on.


http://www.acuraoemparts.com/delray/...st70_e0601.gif

if you go to acura, its #24. System Name / Component : ENGINE WIRE HARNESS-CLAMP (2)

Re: b series transmission to engine block bolts
 

thanks!

Re: b series transmission to engine block bolts
 

I've never been able to find these bolts until now!
They are also listed under
ENGINE WIRE HARNESS - CLAMP
about $20 for all 5
23 90050-PG7-000 BOLT, FLANGE (12X65) qty 2
24 90051-PE0-000 BOLT, FLANGE (12X70) qty 3
(parts lookup for 2001 ITR)