Keyless Entry Stopped Working!
 

My car stopped starting in a weird way. When i turned the ignition on, nothing turned on. I recharged the battery and it started. The next day my car died and nothing worked, my starter wouldn't turn over even with a jump. It ended getting towed to a shop. I have a new starter now but my keyless entry doesn't work. They didn't bother fixing it even though I told em'. I thought they were idiots anyway.

My battery is almost 3yo and puts out 12.6 volts.
My windows work
I checked all my fuses
I replaced my remote battery.

I need some advice. Ill be lookin up info in the mean time.

Re: Keyless Entry Stopped Working!
 

Re: Keyless Entry Stopped Working!
 

My car is a 99ej8. I don't have any sort of deck in my center console. I tried anyway. No worky. I wonder if there is a way to program the remote without using the valet button. Thx for the info

Re: Keyless Entry Stopped Working!
 

Re: Keyless Entry Stopped Working!
 

in fr more because ever since I bought my EM1 my keyless has not functioned. I have tried reprogramming the keypad and it fails.

Re: Keyless Entry Stopped Working!
 

More info needed. Do the locks work through the door switches? Any other details? Do you have an aftermarket alarm system?

http://i267.photobucket.com/albums/i...cture_3240.jpg

Re: Keyless Entry Stopped Working!
 

locks work and all that to my knowledge there is no aftermarket wiring at all.

Re: Keyless Entry Stopped Working!
 

Is the transmitter battery good? Does the red LED illuminate when the button is pushed? Did you precisely follow the 99-00 transmitter programming instructions?

Re: Keyless Entry Stopped Working!
 

yes the led works and I followed the steps and the actuators never go off as directed in step 12

Re: Keyless Entry Stopped Working!
 

Do you have the correct Honda Civic transmitter?

Re: Keyless Entry Stopped Working!
 

1. No luck. My power windows work but the locks don't. I took my car to an eshop and they said it could take about 3 hours worth of work to figure it out($300). They look intimidated too, lol. F that sh!t. Any advice

2. I noticed that some of the harnesses in the door panel have brown marks on them. I wonder if they're fried. I'll update

3. How do you check for a bad ground?

Re: Keyless Entry Stopped Working!
 

yes I have the correct transmitter sir

Re: Keyless Entry Stopped Working!
 

I eventually fixed the problem which was: corrosion comming from the positive battery terminal. I replaced both of the cables running from the + terminal. One went to the starter, the other went to the fuse box.:thumbup: