Removing inner fender shield?
Hey was wondering how you remove the bolts on the inner fender shield. I have removed the ones just above the mudflap that are a philips head but can't seem to see how to remove the others. I initially thought that they were hex bolts but they weren't. Anyone know?
|
Re: Removing inner fender shield?
The little plastic clips? You pop the center section outwards with a flat head screwdriver, which should move it out just above the rim then you should be able to pull them right out.
|
Re: Removing inner fender shield?
Originally Posted by Pauly321
(Post 39427005)
Hey was wondering how you remove the bolts on the inner fender shield. I have removed the ones just above the mudflap that are a philips head but can't seem to see how to remove the others. I initially thought that they were hex bolts but they weren't. Anyone know?
|
Re: Removing inner fender shield?
I have a 97' ex, I don't think that they are all plastic. The ones that are right on the edge of the fender seem to be metal. I will check and then get back to you. I should be able to get a good look because the car is in the air now to replace the half shaft.
|
Re: Removing inner fender shield?
It's probably just hardened plastic. That or you have aftermarket ones. The stock setup is plastic clips that come off as I described and the three or four phillips.
|
Re: Removing inner fender shield?
Yeah drivers side has the plastic clips like you were saying but the passanger side has these metal ones. I'll have to try and figure out how they come out. Thanks
|
All times are GMT -8. The time now is 10:21 AM. |
© 2024 MH Sub I, LLC dba Internet Brands