(4th gen) any good pics of front bumper removal around?
Going to knock out a 1 day jam session on new headlights, fresh fenders, new front bumper......
Its been 6yrs+ since I took it off.....I know there was something tricky about the screws under the headlights...... |
Re: (4th gen) any good pics of front bumper removal around?
there are 2 nuts holding it from the engine bay side near headlights. Two clips down near lower splash shield and screws in the corner of bumper. And 2 screws on each side hidden behind the front blinkers.
|
Re: (4th gen) any good pics of front bumper removal around?
Originally Posted by NirVTEC
(Post 39341450)
Going to knock out a 1 day jam session on new headlights, fresh fenders, new front bumper......
Its been 6yrs+ since I took it off.....I know there was something tricky about the screws under the headlights...... I can't believe one of the most OG members here does not know this one. Remove your bumper lights and you will see the 14mm bolts. also remove the screw on the end of the bumper where it meets the fender. unplug the lights too. there is also a couple of fasteners under the front lip. the screws under the headlights are not accessible with the bumper in place. I left those ones off just so I can remove the front cover with very little trouble. |
Re: (4th gen) any good pics of front bumper removal around?
Originally Posted by Apex1972
(Post 39341707)
I can't believe one of the most OG members here does not know this one.
. Its been a long time and I did it with a friend last time.......I did remember there was some weird bolt placement though! :p thanks guys...... |
Re: (4th gen) any good pics of front bumper removal around?
Haven't you got a Helms?
Dont forget the 2 screws / plastic clips under the fender liners on each side... |
Re: (4th gen) any good pics of front bumper removal around?
Originally Posted by AdReNaLiN
(Post 39344430)
Haven't you got a Helms?
Dont forget the 2 screws / plastic clips under the fender liners on each side... |
Re: (4th gen) any good pics of front bumper removal around?
Originally Posted by Apex1972
(Post 39341707)
I can't believe one of the most OG members here does not know this one.
Thats what I said.:hammer: |
Re: (4th gen) any good pics of front bumper removal around?
|
Re: (4th gen) any good pics of front bumper removal around?
i always read to remove the bolts behind the blinkers but i never did
also the nuts right below the headlights inside the engine bay i never took off for me all i do is the fender/bumper screws the blinker lights and those screws near the vent. i really need some screws to hold my bumper in place thoe it feels so loose but no gaps |
All times are GMT -8. The time now is 09:19 PM. |
© 2024 MH Sub I, LLC dba Internet Brands