Honda-Tech - Honda Forum Discussion

Honda-Tech - Honda Forum Discussion (https://honda-tech.com/forums/)
-   Acura Integra (https://honda-tech.com/forums/acura-integra-6/)
-   -   DIY: Replace power steering hose (Pressure) (https://honda-tech.com/forums/acura-integra-6/diy-replace-power-steering-hose-pressure-2587440/)

kroze 06-12-2009 07:38 AM

DIY: Replace power steering hose (Pressure)
 
My pressure power steering hose is leaking so it's time to replace it. I didn't know how simple this job is but a lot of repair shop want to charge 2 hours (Approximately $180 after tax) to replace this freaking hose. While you're at it, I suggest you replace the return line of the power steering as well, it's really cheap & easy. But anyway here's the guide for the Pressure hose replacement.

Tools needed:
- 10mm Socket & Extension
- Ratchet
- 14mm Metric Flare nut Wrench
- 9/16 Standard Flare nut Wrench (the new hose from autozone uses 9/16 instead of 14mm)
- Adjustable wrench (not in picture)
http://i44.tinypic.com/1eruyq.jpg

Jack up the car
http://i42.tinypic.com/rhpoh4.jpg

Remove these 2 bolts (10mm)
http://i44.tinypic.com/fo0oix.jpg

Remove all bracket holding the hose (10mm) Not in this picture because I've already removed them and thrown them away. You can reuse them if you bought the rubber bushings for the new hose, if not do what I did and throw them away :dunno420:
http://i43.tinypic.com/28sseb4.jpg


Unplug the sensor, There's another bracket holding the line around there, you'll need an extension to remove the 10mm bolt (or crawl under the car and feel where the bolt is get it from there, I've removed it and thrown it away as I didn't buy the new rubber bushing for the bracket.
http://i41.tinypic.com/dbmcrp.jpg

Now crawl under the car and use your 14mm flare nut wrench to remove this bolt.
http://i43.tinypic.com/3582v0x.jpg


With the old Power steering hose out, use an adjustable wrench and remove the old sensor & put it into the new hose.
http://i42.tinypic.com/116rv4w.jpg

Install new hose in reverse order & you're done!!


Here's the old & leaking hose for reference.
http://i42.tinypic.com/2ly3erb.jpg

HONDRETTI 06-12-2009 11:32 AM

Re: DIY: Replace power steering hose (Pressure)
 
good job. i had to do this last year when i recovered my car, for some reason the feed line was leaking. you ABSOLUTELY need a line wrech to remove that nut, i'll vouch for that.

whitakjc989 01-12-2012 04:30 AM

Re: DIY: Replace power steering hose (Pressure)
 
The pictures no longer work, I am currently trying to install a power steering hose on a 92 prelude any help is greatly appreciated.

DirtyDA9 01-12-2012 11:20 AM

Re: DIY: Replace power steering hose (Pressure)
 
Because it's from 2009. I love how the only picture working now is of Jude Law or whoever lol.

ZombiePharoh 04-06-2012 09:24 PM

Re: DIY: Replace power steering hose (Pressure)
 
really funny hahah. heres the tools you need. a scarf. jack up the car. cats.

racebum 04-06-2012 09:28 PM

Re: DIY: Replace power steering hose (Pressure)
 
quality write up right hea

Bouckaroo 04-15-2013 10:53 AM

Re: DIY: Replace power steering hose (Pressure)
 
This thread sucks lol


All times are GMT -8. The time now is 08:21 PM.


© 2024 MH Sub I, LLC dba Internet Brands