Replacing intake manifold gasket...
So my OEM gasket has blown out and my car is idling at like 1500 rpm.
Are there any tricks or tips to installing a new gasket? Do I need any hondabond or anything? BTW, it's a '99 EX and I'm putting a Hondata gasket on it. |
Re: Replacing intake manifold gasket...
Sweet! No one has put an intake manifold gasket on before! w00t!!
|
Re: Replacing intake manifold gasket...
Just pull off the intake mani, throw on some hondabond or some other type of gasket sealing stuff if you want, not too much though, and put it back on, pretty straight forward.
|
Re: Replacing intake manifold gasket...
So, I do need some hondabond?
|
Re: Replacing intake manifold gasket...
Originally Posted by EX-T
(Post 38753202)
So, I do need some hondabond?
You don't need but it would help to seal it up tighter. |
Re: Replacing intake manifold gasket...
word
|
Re: Replacing intake manifold gasket...
Install the gasket dry...
|
Re: Replacing intake manifold gasket...
Originally Posted by fc3srx729
(Post 39308974)
Install the gasket dry...
OP, why did you decide to go with the HonData gasket? How much did that shit set you back? |
Re: Replacing intake manifold gasket...
Hondata gasket = waste of money
OEM or GTFO |
Re: Replacing intake manifold gasket...
Originally Posted by NACvicSi
(Post 39309356)
Hondata gasket = waste of money
OEM or GTFO OEM Honda IM gasket for you 99 EX is part number 17105-P2P-A01, probably can get it for like $19-$23 from the dealer. |
Re: Replacing intake manifold gasket...
I know... old thread. Just curious if anyone has used the myhondahabit intake manifold gasket. I have the stud kit, but am ready to swap out my hondata gasket for something that won't bulge into the runners. They claim their is a thermal gasket too, but not made of plastic.
|
All times are GMT -8. The time now is 02:24 AM. |
© 2024 MH Sub I, LLC dba Internet Brands