Honda-Tech - Honda Forum Discussion

Honda-Tech - Honda Forum Discussion (https://honda-tech.com/forums/)
-   Honda Civic (2006 - 2015) (https://honda-tech.com/forums/honda-civic-2006-2015-79/)
-   -   Increase Low End Torque, Horsepower (https://honda-tech.com/forums/honda-civic-2006-2015-79/increase-low-end-torque-horsepower-2549462/)

Gator0302 04-15-2009 08:46 PM

Increase Low End Torque, Horsepower
 
I love the si, but as we all know there is really no low end torque/horsepower. What are the most efficient ways to increase this? Engine work, turbo, supercharger?

FijiBlueFG2 04-16-2009 04:42 AM

Re: Increase Low End Torque, Horsepower
 
K24 swap.

cretinx 04-16-2009 06:42 AM

Re: Increase Low End Torque, Horsepower
 
forced induction
OR
raise compression
OR
raise displacement
OR
higher final drive ratio




if you want low end torque, you probably should look somewhere other than Honda.

98vtec 04-16-2009 06:42 AM

Re: Increase Low End Torque, Horsepower
 
clean out your ash tray like the v8 guys do

holsetcivic 04-16-2009 06:46 AM

Re: Increase Low End Torque, Horsepower
 
u should do some research on an adjustable cam gear. there is torque in the powerband, u just have to find it. and by either advancing or retarding the timing using the cam gear, that torque can be found.
good luck

teggsr925 04-16-2009 06:56 AM

Re: Increase Low End Torque, Horsepower
 

Originally Posted by holsetcivic (Post 38189589)
u should do some research on an adjustable cam gear. there is torque in the powerband, u just have to find it. and by either advancing or retarding the timing using the cam gear, that torque can be found.
good luck

tuning isnt good enough for cams yet. well its doable, but you wont get the most potential from a cam until kpro

i-VTEC_DOHC 04-16-2009 09:53 AM

Re: Increase Low End Torque, Horsepower
 
the cam gears on our cars adjust themselves for maximum valve overlap so adjusting the cam gear would do you no good. its all for emissions.

K5^ 04-16-2009 09:59 AM

Re: Increase Low End Torque, Horsepower
 

Originally Posted by 98vtec (Post 38189543)
clean out your ash tray like the v8 guys do

lol

Gator0302 04-16-2009 12:07 PM

Re: Increase Low End Torque, Horsepower
 
Can you explain how the difference in final drive is an option for more low end. This is the second time I have heard this and I don't know the reason for this.

clemsonhatch 04-16-2009 01:03 PM

Re: Increase Low End Torque, Horsepower
 
1 Attachment(s)
Torque is pretty flat on the K20 from 2500-8200rpm. See dyno:

Kiwibird83 04-16-2009 03:38 PM

Re: Increase Low End Torque, Horsepower
 
The K20 already runs incredibly good torque for a 4 cylinder, N/A engine, the only way your going to get a mass increase in torque is with forced induction or Nitrous.

That being said the reflash is supposed to increase the overall torque curve very well.

teggsr925 04-16-2009 03:42 PM

Re: Increase Low End Torque, Horsepower
 

Originally Posted by Kiwibird83 (Post 38196247)
The K20 already runs incredibly good torque for a 4 cylinder, N/A engine, the only way your going to get a mass increase in torque is with forced induction or Nitrous.

That being said the reflash is supposed to increase the overall torque curve very well.

it does, well from what ive seen an from what my friends tell me. 2 people i know have the reflash and i havent gotten the chance to ride/drive them, but everybody that has said you can feel a big difference in tq

BlurpleDC2 04-16-2009 05:56 PM

Re: Increase Low End Torque, Horsepower
 
who buys a honda for torque? Rev that bitch all the way to 8000 rpm like its supposed to. K20 like most other honda engines makes shit torque, but good horsepower for a n/a 2.0L. Get a supercharger if you REALLY must have some extra low end.


All times are GMT -8. The time now is 11:08 AM.


© 2024 MH Sub I, LLC dba Internet Brands