B16 Tranny and Oil Capacities please
I need the manual transmission (transaxle if you want to get technical) capacity for a B16A, S4C in particular.
I need the oil capacity for a B16A. I've heard 4 quarts, I've heard 5, which is it? This is all I need, thanks. |
Re: B16 Tranny and Oil Capacities please
hey dood,
i think it should be 3.5-4 litres of oil for the motor (check the dipstick after 3.5 is poured in). the tranny fluid should be about 2-3 bottles. fill it till it starts to come out of the hole :) |
Re: B16 Tranny and Oil Capacities please
Originally Posted by Mashimaro
(Post 37644878)
hey dood,
i think it should be 3.5-4 litres of oil for the motor (check the dipstick after 3.5 is poured in). the tranny fluid should be about 2-3 bottles. fill it till it starts to come out of the hole :) Here in the US it is about 3.5-3.9 Quarts. I usually pour 3.5 and then wait a while before I check the oil level to see if it needs more. |
Re: B16 Tranny and Oil Capacities please
Thanks guys. I primarily wanted to know the tranny capacity to know if I should buy 2 or 3 quarts, sounds like 3.
|
Re: B16 Tranny and Oil Capacities please
yea, buy 3. it takes about 2.5
|
Re: B16 Tranny and Oil Capacities please
(US quarts)
engine oil: engine overhaul capacity - 5.1 quarts oil change with filter - 4.2 quarts oil change w/o filter - 3.9 quarts transmission: overhaul - 2.4 quarts drain/refill - 2.3 quarts EDIT: fixed the tranny capacity, thanks jdm602 |
Re: B16 Tranny and Oil Capacities please
Where did you find the info on 2 quarts for the tranny?
|
Re: B16 Tranny and Oil Capacities please
factory service manual
it's definitely believable... i know that a D-series manual tranny is also 1.9 quarts for drain/refill. |
Re: B16 Tranny and Oil Capacities please
Originally Posted by Rok_Stok
(Post 37645768)
Where did you find the info on 2 quarts for the tranny?
|
Re: B16 Tranny and Oil Capacities please
tranny is actually 2.3 us qts. per oil change. 2.4 for overhaul.
|
Re: B16 Tranny and Oil Capacities please
Originally Posted by jdm602
(Post 37645846)
tranny is actually 2.3 us qts. per oil change. 2.4 for overhaul.
sorry about that... i was reading the D-series tranny stuff on accident. my engine oil info is correct though. |
Re: B16 Tranny and Oil Capacities please
Alright, 2.3 qts. Thanks.
Quick question: Do I use the D16 power steering pump on the B16? |
Re: B16 Tranny and Oil Capacities please
I don't know if that will bolt up. You can try it though.
|
Re: B16 Tranny and Oil Capacities please
hi, how many quarts to fill a b16 automatic tranny? i just bought this b16a2 automatic swap and need to fill the tranny up. thanks
|
All times are GMT -8. The time now is 08:19 AM. |
© 2024 MH Sub I, LLC dba Internet Brands