94 Accord Cigarette Lighter Outlet LOOSE
Hi,
A few months ago, I had my radar dectector plugged into my cigarette lighter and unplugged it. Due to the tight fit, the plug for the detector yanked out the cigarette lighter outlet. Since then, its operating half the time. The LED for the ashtray works because I see the blue light. The LED for the cigarette lighter works too, so i think the only problem here is that the assembly housing is loose. I was thinking about drilling 2 holes and screwing the black face in, but that would do nothing for the actual outlet. Any ideas? The outlet works fine, its just a loose connection I need to fix. Perhaps some conductive glue? Thanks all. |
Re: 94 Accord Cigarette Lighter Outlet LOOSE (moyman)
we had the same topic not to long ago..i suggest you check this page or the next or do a search.
|
Re: 94 Accord Cigarette Lighter Outlet LOOSE (moyman)
jus push that bitch back in, it should clip in if im right....i think
|
All times are GMT -8. The time now is 12:05 AM. |
© 2024 MH Sub I, LLC dba Internet Brands