Rocker arm adjustment.
SO my rocker arms make a ton of noise on my d16y8 when i get around 3k RPM. It gets annoying after a while. Is there any way to adjust them?
|
mine just whine. But then again my motor is just beat. Which is why im swapping it out of there lol.
|
this is call a valve adjustment job.
|
Originally Posted by Ruben19
(Post 36749240)
this is call a valve adjustment job.
|
for the op, to do a valve lash adlustment. Take the v/c off and at the end of the rocker arm will be a lock nut and lash adjuster that goes does to the valve. Loosen the lock nut with a 8 or 10mm wrench, use a feeler gauge between the valve and adjuster and adjust the aduster to spec. I think the inake is .008" and the exhaust is .012"..i tihnk but go look your up and make sure
|
All times are GMT -8. The time now is 11:10 PM. |
© 2024 MH Sub I, LLC dba Internet Brands