For TSX K24 swap in to EG, how do I get it going without drive by wire throttle cable?
 

For TSX K24 swap in to EG, how do I get it going without drive by wire throttle cable? What do I need to get my car running? I'm thinking about picking up a K24 from this guy that has a totalled TSX. Any information would be greatly appreciated. Thanks!

Re: For TSX K24 swap in to EG, how do I get it going without drive by wire throttle cable? (OneSimpl
 

pretty sure you can throw a K20 head on there and do the frankenstine and get rid of the drive by wire. correct me if im wrong.

k20a.org is ur new best friend

Re: For TSX K24 swap in to EG, how do I get it going without drive by wire throttle cable? (OneSimpl
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ITR-EKcoupe &raquo;</TD></TR><TR><TD CLASS="quote">pretty sure you can throw a K20 head on there and do the frankenstine and get rid of the drive by wire. correct me if im wrong.</TD></TR></TABLE>

I've heard that I can just switch to a K20 Throttle Body, but wanted to confirm this.

And again, I'm referring to a TSX K24 already with 11:1 compression. Just do some headwork and call it good. I dunno.

Re: (ekb16)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ekb16 &raquo;</TD></TR><TR><TD CLASS="quote">k20a.org is ur new best friend</TD></TR></TABLE>

Got it. Thanks.

Re: (OneSimpleHatch)
 

swap to a RSX throttle body and KPRO and you are good to go

Re: For TSX K24 swap in to EG, how do I get it going without drive by wire throttle cable? (OneSimpl
 

Like stated above, Just swap out the TB for one off of a RSX w/ a regular throttle cable and run k-pro. Problem solved. There is no need to swap the whole head.

In order to run a K20 throttle body, you'll need an adapter plate. To do as direct of a swap as possible, get an Accord ('02 - '04) throttle body. They use similar intake manifold designs and are cable driven.

Re: (toyomatt84)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by k24_dc5 &raquo;</TD></TR><TR><TD CLASS="quote">swap to a RSX throttle body and KPRO and you are good to go </TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Turbowa &raquo;</TD></TR><TR><TD CLASS="quote">Like stated above, Just swap out the TB for one off of a RSX w/ a regular throttle cable and run k-pro. Problem solved. There is no need to swap the whole head.</TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by toyomatt84 &raquo;</TD></TR><TR><TD CLASS="quote">In order to run a K20 throttle body, you'll need an adapter plate. To do as direct of a swap as possible, get an Accord ('02 - '04) throttle body. They use similar intake manifold designs and are cable driven.</TD></TR></TABLE>

Thanks guys! That's some good info there! https://honda-tech.com/forums/images/smilies/emthup.gif

Re: (OneSimpleHatch)
 

you can also use 06 accord throttle body those arent drive by wire poo!

Re: (oneslowstd)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by oneslowstd &raquo;</TD></TR><TR><TD CLASS="quote">you can also use 06 accord throttle body those arent drive by wire poo!</TD></TR></TABLE>

Good stuff thanks for the continuous info guys!

Re: (OneSimpleHatch)
 

good luck https://honda-tech.com/forums/images/smilies/embeer.gif