BRAICH BUILT A/M H2B Build
 

The old B20 vtec 232hp159tq

http://is.rely.net/1-8154-89249-l-3M...TQJRFSYaqQ.jpg

the new 89x95 h22

http://is.rely.net/1-8154-89250-l-Lq...SDR5cT2Mdg.jpg

http://is.rely.net/1-8154-89251-l-JS...inMovVR0xQ.jpg

http://is.rely.net/1-8154-89252-l-cf...uReBs61MAA.jpg

http://is.rely.net/1-8154-89253-l-FH...jxEm8LXczw.jpg

http://is.rely.net/1-8154-89254-l-la...EAOeg4eTZQ.jpg

http://is.rely.net/1-8154-89255-l-pl...uGxlMIJOLw.jpg

http://is.rely.net/1-8154-89257-l-oy...EMWp1Ei4kw.jpg

http://is.rely.net/1-8154-89259-l-eB...L3NqOl4bQQ.jpg

http://is.rely.net/1-8154-89258-l-JH...6ZSVebE8cA.jpg


just need my magnus motorsports intake manifold and then to the dyno..


Modified by JDM JEFFREY at 12:08 PM 8/6/2008

Re: my h2b build (JDM JEFFREY)
 

Sick sick sick!!! https://honda-tech.com/forums/images/smilies/emthup.gif https://honda-tech.com/forums/images/smilies/emthup.gif

Re: my h2b build (YeeJ6)
 

Coupe or hatch? Thats a sick setup man i want to see pics of the chasis also

Re: my h2b build (turboedsupe)
 

its a hatch
ill post pics in a bit

Re: my h2b build (JDM JEFFREY)
 

Very nice . . . https://honda-tech.com/forums/images/smilies/emthup.gif

Care to break down the setup?

Re: my h2b build (2fastGSR)
 

http://is.rely.net/1-8154-89281-l-g1...RTZHLuJkQA.jpg


the set up is
h22 block
h23 crank
h22 pistons
egale rods
cc ported head
bloxs bs
magnus intake mani
ssr header..

the block is a loner block from PED..well mine gets built..
my block is a h22a4 ge sleeves
97 f23 crank 90 bore
12.5 comp

Re: my h2b build (2fastGSR)
 

hows the re-build going bro?

Re: my h2b build (JDM JEFFREY)
 

Sounds pretty killer man. PED puts out some rad builds.

Rebuild is going well. Bigger and badder is the name of the game . . https://honda-tech.com/forums/images/smilies/emwink.gif

thanks for asking though https://honda-tech.com/forums/images/smilies/emthup.gif

Re: my h2b build (2fastGSR)
 

thanks for the kind words

Re: my h2b build (JDM JEFFREY)
 

damn.......... lol thats all i can say. On your sig, you said you had a k20 running 12.0 at the track? Hope you can give us a compare/contrast when your h2b is done!

Re: my h2b build (JDM JEFFREY)
 

nice, like the shaved vc letters https://honda-tech.com/forums/images/smilies/emthup.gif
Any pics of the magnus intake mani???

Re: my h2b build (88ED8)
 

any pictures of frame rail to crank pulley clearance?

Re: my h2b build (Linh.)
 

Is that a qsd plate? Whats that writing on the top?

Re: my h2b build (SIXTY)
 

It's the QSD logo and part number.

Wow! came outta nowhere with a sick build lol

Re: (Shadowz7429)
 

wow!! Nice header man i got the same one just came in last week https://honda-tech.com/forums/images/smilies/emthup.gif

Re: my h2b build (88ED8)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 88ED8 &raquo;</TD></TR><TR><TD CLASS="quote">It's the QSD logo and part number.</TD></TR></TABLE>

Mine doesnt have that https://honda-tech.com/forums/images/smilies/emsad.gif

Re: my h2b build (SIXTY)
 

I guess only the "new" plates have it since there wasn't always a part number for the QSD plates..... They also have a EK instead of a CRX CNCed on them!

I want a new plate with a CRX on it https://honda-tech.com/forums/images...s/emsmilep.gif !!!...

Re: my h2b build (88ED8)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dohcem1 &raquo;</TD></TR><TR><TD CLASS="quote">damn.......... lol thats all i can say. On your sig, you said you had a k20 running 12.0 at the track? Hope you can give us a compare/contrast when your h2b is done!</TD></TR></TABLE>

the k20 ek was my homies car..
the same motor in the ped car went 11.5<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SIXTY &raquo;</TD></TR><TR><TD CLASS="quote">Is that a qsd plate? Whats that writing on the top?</TD></TR></TABLE>

ya its the new qsd kit
.<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 88ED8 &raquo;</TD></TR><TR><TD CLASS="quote">nice, like the shaved vc letters
Any pics of the magnus intake mani???
</TD></TR></TABLE>

the mani will be there on friday

Re: my h2b build (JDM JEFFREY)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Linh. &raquo;</TD></TR><TR><TD CLASS="quote">any pictures of frame rail to crank pulley clearance?</TD></TR></TABLE>

http://is.rely.net/1-8154-89335-l-zt...5fvKss0QRg.jpg

the PED 6 point cage..

http://is.rely.net/1-8154-89336-l-gP...nKya1fwKwQ.jpg

http://is.rely.net/1-8154-89337-l-af...CNfBveI3pw.jpg

back side https://honda-tech.com/forums/images...s/emsmilep.gif

http://is.rely.net/1-8154-89338-l-5n...i1EokQU5RA.jpg

Re: my h2b build (JDM JEFFREY)
 

Nice seats!! https://honda-tech.com/forums/images/smilies/emthup.gif

If I were you, I'd loop the heater lines together instead of useing those rubber caps with clamps, mine started to leak over time...

Re: my h2b build (88ED8)
 

thanks. I'll have to do that..

Re: my h2b build (JDM JEFFREY)
 

ahh thats just excessive weight. . . . I capped mine, just make sure they are the thick caps and you hose clamp them and you should be fine. . .

I bought an extra set and bring them to the track with me. I mean they are only 3 bucks haha

Weight savings FTW . . . https://honda-tech.com/forums/images...s/emsmilep.gif https://honda-tech.com/forums/images/smilies/emthup.gif

It really does sound like a killer build man. Now i know what it was like for everyone watching my thread, i am excited to see this thing rip ! haha https://honda-tech.com/forums/images/smilies/emthup.gif

Re: my h2b build (2fastGSR)
 

thanks..
ya i have the thick caps..so ill try them out..
I cant wait for it to be done..I called magnus today to get my tracking number,and they said they sold my mani to someone else..so one more week..I hope..

Re: my h2b build (JDM JEFFREY)
 

looks great man!! https://honda-tech.com/forums/images/smilies/emthup.gif keep us updated https://honda-tech.com/forums/images...es/emsmile.gif