Front splitter (pics inside)
 

Been doin' the front splitter for better downforce, but as the OE front lip is very high, about 18 cm from the ground, I did a vertical piece to down the splitter 8 cm with a piece of aluminum, so with this the splitter is at 9 cm from the ground, I think this will help to get better aerodinamics at the road track, just painted in black to see how it looks, but I think will put it in red... what you guys think?

Sorry for the lack of pics, took them with the cellular
http://www.geocities.com/rictrd/DSC00202.JPG
http://www.geocities.com/rictrd/DSC00204.JPG
http://www.geocities.com/rictrd/DSC00205.JPG
http://www.geocities.com/rictrd/DSC00207.JPG
http://www.geocities.com/rictrd/DSC00212.JPG

Re: Front splitter (RicTRD)
 

nice work~

is the black bottom piece fiberglass?

wow this is exactly how i was going to make mine. stole the idea right out of my head!

Re: Front splitter (RicTRD)
 

nice work. https://honda-tech.com/forums/images/smilies/emthup.gif The splitter looks a bit thin though... what are the materials and thickness?

Re: Front splitter (.:Made in OC:.)
 

The splitter is fiberglass and is about 3mm

Re: Front splitter (RicTRD)
 

Nice job. Im interested in hearing your on track assessment as well. https://honda-tech.com/forums/images/smilies/emthup.gif

Re: Front splitter (get RIGHT)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by get RIGHT &raquo;</TD></TR><TR><TD CLASS="quote">Nice job. Im interested in hearing your on track assessment as well. https://honda-tech.com/forums/images/smilies/emthup.gif </TD></TR></TABLE>

Thanks!, I'll be testing the car next week and see if there's a remarkable difference...

how are you attaching the splitter to the car? the rear portion specifically.

Re: (NTCustoms)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NTCustoms &raquo;</TD></TR><TR><TD CLASS="quote">how are you attaching the splitter to the car? the rear portion specifically.</TD></TR></TABLE>

I have drilled 2 holes at the rear of the subframe at each side and then bolt the rear of the splitter with nuts at the top.

ok that's what i had thought in the first place. seeing these pics makes me want to start already lol. how thick is the aluminum you used for the air dam?