k20 Swap into EK Cost?
I was wondering how much is it now days to do a K20 swap into an EK. And what I need to make a complete swap.
|
search or check the hybrid section
|
Re: k20 Swap into EK Cost? (tshuajzoo559)
8-10k to do it right.
edit, just curious i see your from fresno. did you go to that idt customs meeat a few weekends ago? just curious. |
Re: k20 Swap into EK Cost? (Kurly)
50k wait why does your sig say we know racing and you dont know how much it is to swap a k20 haha
|
Too much for you pal......civic :revs:
|
more than you can afford pal..k20A
http://www.k20a.org/forum/showthread.php?t=20860 search next time |
Re: (ekb16)
My buddy's k20 type r swap into his ek cost him 11 grand. That was parts labor motor tranny everything included.
|
Re: k20 Swap into EK Cost? (tshuajzoo559)
hrmmm..
you need complete motor with ecu and shifter box k20a2 usdm or k20a jdm custom axels custom headers custom fuel rail custom fuel lines custom engine harness or if u want to save money do the wiring urself! custom clutch line fuel pressure regulator ecu has to jdm itr or k20a2 but if its usdm ecu youll have to get it reflashed or get kpro custom mounts radiator hose adapter karcepts shifter box relocation kit uhmm what else.. radiator relocator kit maybe 3" piping too much to think off.. but those are the main stuff.. with USDM k20a2 its probably going to be 7-8 grand with jdm k20a its gonna be 8-9 grand.. OH btw this is if you do the swap YOURSELF! |
Re: k20 Swap into EK Cost? (Kurly)
Nah I didn't have time, but a couple of my buddies went and they said it turn out pretty good.
|
Re: k20 Swap into EK Cost? (-JSpecEk*9-)
Thats the only thing we don't know quit yet about...
|
Re: k20 Swap into EK Cost? (tshuajzoo559)
k20 and ganna stay alot for a long time bc ppl make them out to be a super hero just build ur own motor
|
Re: k20 Swap into EK Cost? (Kurly)
IDT custom = GAY...
they don't know shit bout cars... my buddy k20r in his EK9 cost him a little bit over 20000... but that was when it first came out!!!! |
Re: k20 Swap into EK Cost? (tshuajzoo559)
you could probably do it for around 5g. just go to k20a.org and buy used parts (most people are selling them for cheap)...
ex: motor: buy a complete k20a2 swap- most are around 3k and under now including everything (motor/trans/ecu/wireharness/shifter/cables/alternator/etc) axles: make sure to get it with the swap and just redo the inner with the outers so you dont end up paying 300-400 for new ones that are the same thing ecu: again make sure to get an ecu with the swap (sell it for $200) and then buy a use kpro for about 800-900-costing you in the end about 600-700 for kpro or buy a use itr ecu for under $300 mounts- they go for about $300 use fuel system/lines- they go for about 200-300 including fuel rails/lines/pump used wire harness- goes for about 200 used karcept shifter kit- goes for under $100 used radiator- use your stock one and move it over header-buy a used dc for under $200 catback-use your stock one or go custom misc crap-probably $100-200 |
Re: k20 Swap into EK Cost? (pennies_hatchie)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by pennies_hatchie »</TD></TR><TR><TD CLASS="quote">you could probably do it for around 5g. just go to k20a.org and buy used parts (most people are selling them for cheap)...
ex: motor: buy a complete k20a2 swap- most are around 3k and under now including everything (motor/trans/ecu/wireharness/shifter/cables/alternator/etc) axles: make sure to get it with the swap and just redo the inner with the outers so you dont end up paying 300-400 for new ones that are the same thing ecu: again make sure to get an ecu with the swap (sell it for $200) and then buy a use kpro for about 800-900-costing you in the end about 600-700 for kpro or buy a use itr ecu for under $300 mounts- they go for about $300 use fuel system/lines- they go for about 200-300 including fuel rails/lines/pump used wire harness- goes for about 200 used karcept shifter kit- goes for under $100 used radiator- use your stock one and move it over header-buy a used dc for under $200 catback-use your stock one or go custom misc crap-probably $100-200</TD></TR></TABLE> dam you sure do live up to your name https://honda-tech.com/forums/images...s/emsmilep.gif |
Re: k20 Swap into EK Cost? (n*werk)
I don't know about IDT...but I know majority of all the speed job in Fresno, Ca are rip off...they be buyn ebay shit and selling to us for more. https://honda-tech.com/forums/images...s/emthdown.gif
|
Re: k20 Swap into EK Cost? (pennies_hatchie)
|
All times are GMT -8. The time now is 01:20 AM. |
© 2024 MH Sub I, LLC dba Internet Brands