F20b specs??
Well what I want to know are some specs.Anybody played with them?? Id like to know the rod length. piston skirt length with where the rod bushing goes. Whats the throw on the crank?Like what size are the mains and rods. Int/Exh valve sizes. What are the stock cams ground at. And thats all I can think of for now.Thanks for any help in advance guys.
|
Re: F20b specs?? (hahaha38)
those are some good questions.
i've got a few good answers. This info was taken from a Japanese repair manual I have for the JDM/UKDM 5th Gen CF chassis Accord. deck height = 8.643 bore = 85mm/3.346 Cylinder Head combustion chamber volume = 53.8cc intake valve dia. = 34mm exhaust valve dia. = 29mm head gasket bore = 86mm head gasket thickness = .026 pistons piston dia. = 85mm/3.346 compression height = 1.221 wrist pin dia. = .866 Crankshaft stroke= 88mm/3.464 main journal dia. = 55mm rod journal dia. = 1.771 rods: length = 5.709 width = .935 be bore = 1.890 pin bore = .8649-.8654 Modified by LocOBanAnA at 2:20 AM 6/23/2007 |
Wow thanks for the info thats exactly what I was looking for.
|
Re: (hahaha38)
|
Hay would you happen to know the compression height of an f20c would you?? Or would you be able to point me in the direction of where I could find that info?
|
search in the lude forum ...there is a h/f faq thread i forget whats the title is but it may have it in there ...
so what the plans for your f20b https://honda-tech.com/forums/images...es/emsmile.gif |
Re: (machine4321)
i dont think there are any listing for the F20c in that thread.
just the accord f22's, f20b, and the h22's. <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hahaha38 »</TD></TR><TR><TD CLASS="quote">Hay would you happen to know the compression height of an f20c would you?? Or would you be able to point me in the direction of where I could find that info?</TD></TR></TABLE> yeah....go to your local bookstore. Locate a chiltons, or haynes manual for a s2000. Most of those repair manuals have specs from the factory printed. If your trying to get info for Japanese motors you might have better luck trying to find an importer here in the states to get you a repair manual from overseas. https://honda-tech.com/forums/images/smilies/emthup.gif |
Ive pretty much looked through all the threads on specs in here. Mainly they show hp and tq specs. What im thinking of doing is a f20B with 6.0 length rods special pin location and compressin height. So with 25+ pounds of boost I want 550 at the wheel with about a 12k redline. Ive already found some body that will make me the parts I just need the specs. But yeah thats the plan atleast.LOL. And thanks again for the info ill just keep looking for the rest.LOL
|
All times are GMT -8. The time now is 06:14 PM. |
© 2024 MH Sub I, LLC dba Internet Brands