4x100 Lug to JDM 4x114.3 Lug
 

Sup everyone. I'm looking to get some JDM wheels, but they're near impossible to find in the USDM 4x100 pattern. How difficult (and more importantly, expensive,) would it be to convert my 2000 Si's 4x100 lugs to 4x114.3. Thanks for your help!

Re: 4x100 Lug to JDM 4x114.3 Lug (EM-One)
 

False.

Re: 4x100 Lug to JDM 4x114.3 Lug (EM-One)
 

It will cost you maybe around $500-600 for the 96 spec ITR conversion, but you can turn around and sell your fronts and rears for $300-400. The installation is strictly bolt off and bolt on, very simple.

Re: 4x100 Lug to JDM 4x114.3 Lug (BlueIntegraBoy)
 

Excellent. Thanks, BlueIntegraBoy! Good point about selling my fronts and rears to make up the difference. https://honda-tech.com/forums/images/smilies/emthup.gif

VTECommie: I know that there are plenty of JDM wheels that are in the 4x100 pattern, but I'm looking into getting some GAB Sports wheels in 16x7 inches, and I've found it's pretty difficult to find in 4x100. Almost every 16 inch I've found has been in 4x114.3, so I was just wondering if I found a good JDM lug pair, how much of a hassle it would be to do the conversion.

Re: 4x100 Lug to JDM 4x114.3 Lug (EM-One)
 

i was wondering the same thing. but im getting the 5 lug swap soon so i ended up changing my mind. good answers though!!