Easy but not... Rear seat removal: 88-91 civic hatchback
Okay, these are the fold-down type seats in the hatchback. Much different than the 4-door type that just comes right out. I removed the black plastic spacers on the sides of the seats and they will not slide out. I'm tryin not to damage the paneling (which is what I'm going for to put in my car). These seats will not come out. What am I not doing? There are no bolts, screws or keepers that I can see. Do I need any specific tools?
|
Re: Easy but not... Rear seat removal: 88-91 civic hatchback (D16Cowboy)
nope no special tools, just remove the two black plastic "C/E" clips and spread the two halves apart in the middle and the top back rests should come out then take off the 12mm bolt and that's it.
remove this "E/C" clip https://i175.photobucket.com/albums/...earseat001.jpg now it removed https://i175.photobucket.com/albums/...earseat002.jpg push the seat to the side https://i175.photobucket.com/albums/...earseat003.jpg then remove https://i175.photobucket.com/albums/...earseat004.jpg then do the other side, after that remove this bolt and you should be good https://i175.photobucket.com/albums/...earseat005.jpg Modified by EF001282 at 12:36 AM 4/29/2007 |
Re: Easy but not... Rear seat removal: 88-91 civic hatchback (EF001282)
Good job EF001282, not very often that you see a single response post that's helpful.
|
Re: Easy but not... Rear seat removal: 88-91 civic hatchback (D16Cowboy)
Thanks so very much... I'm going to get it done right now https://honda-tech.com/forums/images...es/emsmile.gif https://honda-tech.com/forums/images/smilies/emthup.gif
|
Re: Easy but not... Rear seat removal: 88-91 civic hatchback (D16Cowboy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by D16Cowboy »</TD></TR><TR><TD CLASS="quote">Thanks so very much... I'm going to get it done right now https://honda-tech.com/forums/images...es/emsmile.gif https://honda-tech.com/forums/images/smilies/emthup.gif </TD></TR></TABLE>
sure no prob, I was bored last night so I felt like helping. |
Re: Easy but not... Rear seat removal: 88-91 civic hatchback (D16Cowboy)
Originally Posted by EF001282
(Post 27632117)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by D16Cowboy »</TD></TR><TR><TD CLASS="quote">Thanks so very much... I'm going to get it done right now https://honda-tech.com/forums/images...es/emsmile.gif https://honda-tech.com/forums/images/smilies/emthup.gif </TD></TR></TABLE>
sure no prob, I was bored last night so I felt like helping. |
Re: Easy but not... Rear seat removal: 88-91 civic hatchback (D16Cowboy)
Originally Posted by Zoliphiite
(Post 51056136)
I fought with these things for an hour last night and gave up for the night. Woke up, found this super helpful info and in seconds had them out. Thanks man
|
All times are GMT -8. The time now is 06:23 PM. |
© 2024 MH Sub I, LLC dba Internet Brands