Turbo T3/T4 Installation Instructions
 

Just purchased a T3/T4 Turbo for a B20B in a 97 Civic and it didn't come with any installation instructions. Does anyone have generic instructions that I can use as a guide?

Thanks....

Re: Turbo T3/T4 Installation Instructions (97CivicDad)
 

its called a search button

https://honda-tech.com/zerothread?id=1263795

1. Open hood, disconnect battery
2. place turbo in engine bay
3 reconnect battery, close hood
4 start car
5. hit vtec and 30psi and rock out with your cock out https://honda-tech.com/forums/images/smilies/emthup.gif

Re: (99B16Si)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 99B16Si &raquo;</TD></TR><TR><TD CLASS="quote">1. Open hood, disconnect battery
2. place turbo in engine bay
3 reconnect battery, close hood
4 start car
5. hit vtec and 30psi and rock out with your cock out https://honda-tech.com/forums/images/smilies/emthup.gif </TD></TR></TABLE>

x2 made me laugh thanks https://honda-tech.com/forums/images/smilies/emthup.gif

Re: Turbo T3/T4 Installation Instructions (97CivicDad)
 

Once you figure it out, Im sure one of our fine members can also help you find what wire you need to get VTAK on your B20B. https://honda-tech.com/forums/images/smilies/emwink.gif

I sure hope you meant "t3/t4 turbo KIT", not just the turbo itself....

Re: Turbo T3/T4 Installation Instructions (97CivicDad)
 

this isnt your car but it will help.
complete drag turbo kit install. take what you need from it.

https://honda-tech.com/zerothread?id=635014

Re: (99B16Si)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 99B16Si &raquo;</TD></TR><TR><TD CLASS="quote">1. Open hood, disconnect battery
2. place turbo in engine bay
3 reconnect battery, close hood
4 start car
5. hit vtec and 30psi and rock out with your cock out https://honda-tech.com/forums/images/smilies/emthup.gif </TD></TR></TABLE>

yes. this is what i did to get mine to work!!!

i know its funny sometimes, but there is no need to be a complete dick to this guy....he is new to the forum and probably doesn't know his way around that well....

lol, it is funny most of the time, but when u ask such a vague question youre not going to get good responses. in other words if you dont care to put the time and effort into the question dnot expect a good, thorough answer

Re: (99B16Si)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 99B16Si &raquo;</TD></TR><TR><TD CLASS="quote">lol, it is funny most of the time, but when u ask such a vague question youre not going to get good responses. in other words if you dont care to put the time and effort into the question dnot expect a good, thorough answer</TD></TR></TABLE>

Nicely put.

Detailed questions are much more meaningful.

When I see a question like 'how do I install a turbo'...it makes me think the individual isn't quite ready for prime time..and needs someone with experience to come help him..either that, or take it to a good speed shop.

Re: (99B16Si)
 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 99B16Si &raquo;</TD></TR><TR><TD CLASS="quote">lol, it is funny most of the time, but when u ask such a vague question youre not going to get good responses. in other words if you dont care to put the time and effort into the question dnot expect a good, thorough answer</TD></TR></TABLE>

well that depends on what frame of mind you are in. you go in with the blinders on yes you will have that type of answer. but if you see through it and can point that person in a direction to go, then thats fine.
my answer was staight to the point.
i agree with schister66 on this one. if we keep this up, we will look like that other honda web forum.

Re: (boostedcivicsir)
 

Turbonetics also has an instruction manuel that's printable on there website. That may help.