accord 02 idle adjustment
I read that there is a screw for the idle adj. but I can't seem to find it. Does anyone know if accord 02 still has it, since the newer models don't.
Thanks. |
Re: accord 02 idle adjustment (trans_ponder)
Any idea ????
|
Re: accord 02 idle adjustment (trans_ponder)
Can you count how many spark plugs you have so I know which engine to look up?
Or better yet, go to hondaautomotiveparts.com, put in your car's info, and look at the 'throttlebody' picture. |
Re: accord 02 idle adjustment (JimBlake)
Thanks!
It's a 2.3L, 4 cyl. LX AUTO 2002. I've seen the throttle picture but can't figure it out. |
Re: accord 02 idle adjustment (trans_ponder)
#1 is the idle adjust screw. Follow the line from that; it points into a hole above the TB bore, positioned at about 11 oclock.
http://www.hondaautomotiveparts.com/...3s8411_e01.gif ps... The procedure for adjusting the "BASE" idle: First, the mechanical stop for the actual throttle plate should only just barely prevent the throttle from wedging stuck closed. Engine warmed up with all electrical loads turned off. Unplug the IACV (#9). (idle will drop down to 'base' idle) Adjust idle to 600?? rpm. (look it up, some years are different) Turn it off & reset the ECU. (pull #13 fuse in box near right-front door hinge) Let it cool down. Plug th IACV back in. Start & idle for 10 minutes WITHOUT TOUCHING THE GAS PEDAL AT ALL. edit-oops: I forgot a step... Modified by JimBlake at 12:17 PM 3/30/2007 |
Re: accord 02 idle adjustment (JimBlake)
Thanks a lot sir!
|
All times are GMT -8. The time now is 07:12 PM. |
© 2024 MH Sub I, LLC dba Internet Brands