1992 honda prelude 2.3 si oxygen sensor wiring diagram
I just got this denso aftermarket o2 sensor and there is no harness on it, so i have to take the old harness and put it on the new sensor. Do you have a pic or can you tell me what the wires are on the original o2 sensor, ground, heater wire ect...
If not can you tell me how i can find out. |
Re: 1992 honda prelude 2.3 si oxygen sensor wiring diagram (92preludesi2.3)
I don't have my O2 sensor in front of me, so this is going off the Helms manual:
Using this diagram, you're looking at the O2's connector: http://catimages2.sophio.com/webapp/...l/25024601.jpg The Helms lists the connector from the wiring harness side, so the coordinating wires on the O2 connector are: Top right: (heater +) Top left: (heater - ) Bottom right: (sensor + ) Bottom left: (sensor - ) Hope that helps. https://honda-tech.com/forums/images/smilies/emthup.gif |
All times are GMT -8. The time now is 12:44 PM. |
© 2024 MH Sub I, LLC dba Internet Brands