tach install
 

i am installing my tach n would like to know where the rpm pickup is to tell the guage wat rpm the engine is at......i no it has to be from the distributor but don't know which wire to connect it to....if anyone can help me that would be cool https://honda-tech.com/forums/images/smilies/emthup.gif

Re: tach install (caymanjdm97dc2)
 

Open up your distributor cap and look at the coil, look for the - negative side wire and clip it to that wire.

Re: tach install (BOOSTED RIVAL)
 

wat color would be...would it be black or....wat

this what i did with my honda civic i took the guege cluster out and theres 3 screws behind the actual rpm guage and al you need to do is connect the wires to it green black and red and it hink i other 2 wires are for illumination but i didint hook it up.. but it works...

Re: (lol_on_v8s)
 

thanks i'll go n try it out.......thanks for all the help
https://honda-tech.com/forums/images...es/emsmile.gif https://honda-tech.com/forums/images/smilies/emthup.gif https://honda-tech.com/forums/images/smilies/emthup.gif

Re: (caymanjdm97dc2)
 

if anyone has any pics on how to do this plz post em this would also help me alot thanx