91 integra door panel
Hello,
I'm in the process of removing a door panel off of a 91 da Integra. I've gotten all of the retaining screws and clips off of the door panel but I'm having problems removing it from the top part of the door where the molding meets the door panel. In my DC2 the panel just pulls off of the door but in this car it wants to stay on the door. Unfortunately I don't have a manual. Can anyone shed some light on this? Thanks! J |
Re: 91 integra door panel (Educator)
roll down window
and gently tap from the bottom with the palm of your hand... |
Re: 91 integra door panel (mr.beeks)
On my 92 DA, you pull the bottom of the door panel out a few inches, then pull the whole panel up and it should come right off without too much effort.
|
Re: 91 integra door panel
do you know where i can find 91 black RS door panels??
|
Re: 91 integra door panel
If you have all the screws out and the only thing holding it on is the top edge it sometimes helps to slide the panel towards the rear of the door slightly.
|
All times are GMT -8. The time now is 02:10 PM. |
© 2024 MH Sub I, LLC dba Internet Brands