ls swap in 97 civic hx
A friend of mine has installed a B18B in place of the single cam. The engine is out of a 92 integra. The ecu and distributor are out of a 97 integra.
The swap went great, the car starts and idols fine. The problem is when you try to rev the car it wants to bog down, and won't go anywhere. I know it is a mess, but i am just trying to help a brutha out. Any info is greatly appreciated!!! |
bump
|
Re: ls swap in 97 civic hx (stifflerEG)
any Cel??
|
Re: ls swap in 97 civic hx (stifflerEG)
does it only go to 4 on the rpms
|
if you rev it slow enough it would just barely make it there. kind of sounds like lack of fuel, but i really don't think that's the problem...
|
bump
|
bump again
|
Re: ls swap in 97 civic hx (stifflerEG)
you need to get a jumper harness that was what was wrong with mine an it was doing the same thing
|
bump
|
map and tps backwards?
|
check the map sensor connection as well, the hx probably had a TB mounted map, and depending on which TB he used it might not have been, so it could have gotten forgotten or not plugged in.
|
bump
|
Re: (stifflerEG)
did you mess with the timing
|
timing is perfect
|
Re: ls swap in 97 civic hx
So what happened? having the same issue.
|
Re: ls swap in 97 civic hx
bump
|
All times are GMT -8. The time now is 12:55 AM. |
© 2024 MH Sub I, LLC dba Internet Brands