can 2.3 vtec head fit on 2.2 block
can a 98 honda accord 2.3 liter cylinder head fit on a 94 honda 2.2 accord ex vtec block
my 94 has all stock parts on it, if it does fit would i need to change the ecu or anything else to make it work properly Here is the reason why i need a head (U DONT HAVE TO READ THIS IF YOU DDONT WANNA) i traded my b18b1 hatch for this damn auto ex accord sedan ya i know it was a kinda dumb thing to do plus i really wanted a stick but i had no money to add to the trade so i ended up wit a even trade i test drove the car 3day b4 i bought it it ran great (minus a dented finder an a jacked up door lock an torn driver side leather seat)i check the oil an it was about a quart low but i thought nothin of it) 3 days later the guy came to my house to make the trade an i didnt really drive the at the time of the trade or check the oil b/c what car fucks up in 3days after the guy left with my hatch i got in the accord to drive my dad to dinner and i rolled up the windows an turned on ac we drove like 3 miles an ate dinner but when i came back out an stated the car it was knockin pretty bad, so i checked the oil an the stick was dry i put 2quarts in it to get home an changed the oil the next day over the past week the head only seems to sound worse (no smoke at all out tail pipes,no check engine, no noise from the block its gotta be the head) i also noticed the car had like an extra 200miles on it an he said he hadnt checked the oil in 6weeks but he didnt know it was out of oil an it wont his fault FUCK HIM!!! https://honda-tech.com/forums/images/smilies/emsad.gif |
Re: can 2.3 vtec head fit on 2.2 block (STPREZ)
ttt
|
Re: can 2.3 vtec head fit on 2.2 block (STPREZ)
yes it will fit...
|
Re: can 2.3 vtec head fit on 2.2 block (momstaxi)
thanx for tellin me it fits
but are there any mods i need to do to make it work properly (ECU, Wiring harness, Manifold,Headers,etc.) |
Re: can 2.3 vtec head fit on 2.2 block (STPREZ)
i cant really tell you for sure if everything fits...but the easiest way would be keep all you existing stuff like intakemanifold, distributer, etc.. i dont think the exhaust manifolds will interchange though, so you would need a new exhaust manifold possibly then just swap the actual head itself, then you would not need to modify the wiring, ecu, etc..again im not 100% positive...
|
non vtec to vtec
how can i make my non vtec to a vtec its a 1996 prelude
|
Re: non vtec to vtec
Originally Posted by race04
(Post 50075903)
how can i make my non vtec to a vtec its a 1996 prelude
|
Re: can 2.3 vtec head fit on 2.2 block
I have a 96 2.2 vtech and looking to buy a 98 2.3 vtech wanting to make sure it will bolt up and connect? was told it will seamlessly?!?!?!?
|
All times are GMT -8. The time now is 07:09 PM. |
© 2024 MH Sub I, LLC dba Internet Brands