what does the iat sensor do?
today i was checking my sensors because i had a fluncuating idle and my engine does a sort of stall and sputters. i replaced the tps sensor and put it to specs. I cleaned the iacv. I checked the map and the iat. The map is working fine except the iat. i checked it with voltmeter at 20dc's and it gave a 1.89-2.00. Is this bad? I want to make sure i checked it right. I tapped the + needle to the red wire and the -needle to the green wire. I checked my haynes book and it said that the voltage should be between 3.5-5.5 is this correct or am i wrong. Here it goes with my stupid ? what does the iat do?
|
Re: what does the iat sensor do? (civic_type_r)
senses intake air temp? http://images.honda-tech.com/set1//smile/emcrook.gif
|
Re: what does the iat sensor do? (IslandSi)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by IslandSi »</TD></TR><TR><TD CLASS="quote">senses intake air temp? http://images.honda-tech.com/set1//smile/emcrook.gif </TD></TR></TABLE>
i guess http://images.honda-tech.com/set1//smile/emcrook.gif |
Re: what does the iat sensor do? (civic_type_r)
c'mon guys!
|
Re: what does the iat sensor do? (civic_type_r)
The IAT tells the ECU how hot the coolant is...duh.
C'mon now - IAT - intake air temperature - not that hard. Because Honda's use a Speed-Denisty type of fuel injection system, the volume of air entering the engine is not directly measured, as it is in a MAF based car. The temp of the air must be known to calculate this volume. Temp/Voltage: 60*/3.35v 70*/3.08v 80*/2.81v You can also use the ECT sensor as a reference value to compare to the IAT when the engine has been allowed to sit overnight. They share the same output characteristics. |
All times are GMT -8. The time now is 11:29 PM. |
© 2024 MH Sub I, LLC dba Internet Brands