how many quarts of mtf?
i just changed my tranny fluid a couple of weeks ago, and resently i've been having trouble getting into reverse, someone told me that its because i did not put enough mtf (i put 2.5 quarts) so how much are you supposed to put?
[Modified by xlr8 si, 5:45 AM 1/18/2002] |
Re: how many quarts of mtf? (xlr8 si)
2.5 is more than enough
takes just over 2, like 2.2 |
Re: how many quarts of mtf? (xlr8 si)
Just a bit over 2.
|
Re: how many quarts of mtf? (sgT)
ok, if its only about 2.5 then why do i suddenly have a problem of getting into reverse? i have to go into first and second then reverse just so it will go in with ease. also one more question how many people put the new mtf through the hole where the vehicle speed sensor (v.s.s.) goes? thats where i put it and its a whole lot easier than through the bottom.
|
Re: how many quarts of mtf? (xlr8 si)
ur suppose to go into first gear then reverse to syn. the gears if u want to do a reverse..
r |
Re: how many quarts of mtf? (RICKS R)
ur suppose to go into first gear then reverse to syn. the gears if u want to do a reverse.. r |
Re: how many quarts of mtf? (xlr8 si)
i recently changed my mtf and i put in at least 2.5 quarts(thats how much it took before it started running out the top hole. i have been having some trouble lately getting into first too, i am wondering if i put in too much mtf. where is the speed sensor located?
|
Re: how many quarts of mtf? (xlr8 si)
I think its a common problem for most honda trannys, I usually just put it in 1st then R....or release the clutch & press it again, try put into R again.
|
Re: how many quarts of mtf? (forksports)
You might have put too much, I think the actual spec is 2.2 quarts
I always just put 2 quarts http://images.zeroforum.com/smile/emsmilep.gif |
Re: how many quarts of mtf? (xlr8 si)
ok, if its only about 2.5 then why do i suddenly have a problem of getting into reverse? |
Re: how many quarts of mtf? (typeR158)
i recently changed my mtf and i put in at least 2.5 quarts(thats how much it took before it started running out the top hole. i have been having some trouble lately getting into first too, i am wondering if i put in too much mtf. where is the speed sensor located? |
All times are GMT -8. The time now is 06:34 AM. |
© 2024 MH Sub I, LLC dba Internet Brands