ring gear holder
 

where do i get one?

Re: ring gear holder (92hondalude)
 

...like what...a differential? https://honda-tech.com/forums/images...s/emsmilep.gif

Re: ring gear holder (92hondalude)
 

hond part # 07LAB-PV00100
try that with a hond dealer.
if not try snapon or matco.

Re: ring gear holder (92hondalude)
 

When I put my ring gear on my Quaife I just took an old cut timing belt and nailed it to the leg of my shop table (4x4). Then I wrapped it around the gear about 1.5 -2 times so that when torquing the bolts the belt got tighter. It is ghetto but worked well.

Pirate

Re: ring gear holder (PirateMcFred)
 

no one at honda know what what part number is https://honda-tech.com/forums/images...s/emthdown.gif

by the way its for a flywheel

thats the part # listed in the honda manual. so https://honda-tech.com/forums/images...s/emthdown.gif to your worthless honda dealer.
http://www.slhondaparts.com/se...se%21
07LAB-PV00100 RING GEAR HOLDER $89.64

Re: (v4lu3s)
 

89.64!!!!!!!!!!!!!!!!!!!!!! to hold a flywheel from moving!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Re: (92hondalude)
 

Get a big fat guy to hold the flywheel still with a prybar. Hasn't failed me yet...

Re: ring gear holder (92hondalude)
 

What are you doing that you need a ring gear holder? Is the crank pulley off? If not, use the crank bolt to prevent the flywheel from turning.

i usually use a long angle iron with 2 holes drilled in it, so i bolt the angle iron to the flywheel with a pair of pressure plate bolts. that way i i have great levereage for breaking the flywheel bolts loose.