KiddRACING D Series Sidewinder Header
#1
Thread Starter
Join Date: Oct 2003
Location: atlanta, ga, usa
Posts: 5,899
Likes: 0
Received 0 Likes
on
0 Posts
KiddRACING D Series Sidewinder Header
You asked for it here it is.........
KiddRACING D Series Sidewinder Header
304 Stainless Steel
2.5in Collector
Hand Tig Welded
Fits: D15B, D16Z6, D16Y8, D Series Non Vtec
Chassis:EF, EG,EK
DOES NOT CLEAR AC OR PS WITHOUT MODIFICATION
Test car was a simple SOHC NON-VTEC ZC engine. Ill get right to the graphs
This is to show the Conditions for both runs, Humidity, temp ETC.
This graph shows you the KiddRacing Header(RED) at REDLINE versus the Ebay header(BLUE)
THis graph shows you the Kiddracing Header(RED) at 4000 RPMs versus the EBAY Header(Blue)
This graph shows you the Kiddracing Header (RED) at 4500 RPMs versus the Ebay Header(BLUE)
Final Analysis: Basically our header made more power EVERYWHERE over the EBAY 4-1 which is comparable to a DC off the shelf header in terms of piping size, design, etc. Both headers were run OPEN HEADER, no cats or exhaust hooked up. NO TUNING PERFORMED.
If you look at our graph you will see that our header keeps climbing and making power at redline where the other header falls off. This header is really screaming for an aftermarket cam.
This test proves that even on the mildest of engines you can make good gains (as much as 10whp in the midrange) and it will definetly work well on much more modded engines.
THESE ARE IN STOCK AND NOW SHIPPING!
KiddRACING D Series Sidewinder Header
304 Stainless Steel
2.5in Collector
Hand Tig Welded
Fits: D15B, D16Z6, D16Y8, D Series Non Vtec
Chassis:EF, EG,EK
DOES NOT CLEAR AC OR PS WITHOUT MODIFICATION
Test car was a simple SOHC NON-VTEC ZC engine. Ill get right to the graphs
This is to show the Conditions for both runs, Humidity, temp ETC.
This graph shows you the KiddRacing Header(RED) at REDLINE versus the Ebay header(BLUE)
THis graph shows you the Kiddracing Header(RED) at 4000 RPMs versus the EBAY Header(Blue)
This graph shows you the Kiddracing Header (RED) at 4500 RPMs versus the Ebay Header(BLUE)
Final Analysis: Basically our header made more power EVERYWHERE over the EBAY 4-1 which is comparable to a DC off the shelf header in terms of piping size, design, etc. Both headers were run OPEN HEADER, no cats or exhaust hooked up. NO TUNING PERFORMED.
If you look at our graph you will see that our header keeps climbing and making power at redline where the other header falls off. This header is really screaming for an aftermarket cam.
This test proves that even on the mildest of engines you can make good gains (as much as 10whp in the midrange) and it will definetly work well on much more modded engines.
THESE ARE IN STOCK AND NOW SHIPPING!
Last edited by VtecKiDD; 10-20-2010 at 01:16 PM.
#4
Honda-Tech Member
Join Date: Apr 2007
Location: baltimore, md, 21060
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
Re: KiddRACING D Series Sidewinder Header *PRE-ORDER!*
back to business, do you plan on making this design for a b series or is this just staying as a Dseries production.
#6
Honda-Tech Member
iTrader: (2)
Join Date: Jan 2007
Location: WESTCOAST,HAWAIIANSTYLE, PA KA LO LO
Posts: 3,954
Likes: 0
Received 0 Likes
on
0 Posts
Re: KiddRACING D Series Sidewinder Header *PRE-ORDER!*
That looks good but how good is it???
PM me a price shipped to CALI 90620...
I'm willing to try one if the price is right...
PM me a price shipped to CALI 90620...
I'm willing to try one if the price is right...
Last edited by MOE@Hyper16Valve; 07-16-2010 at 10:17 AM.
Trending Topics
#8
Thread Starter
Join Date: Oct 2003
Location: atlanta, ga, usa
Posts: 5,899
Likes: 0
Received 0 Likes
on
0 Posts
Re: KiddRACING D Series Sidewinder Header *PRE-ORDER!*
Difference is the Bisi header is prob thicker stainless than mine. Better welds since his are hand made. Mine has a 2bolt flange his is flangeless.
#9
Honda-Tech Member
iTrader: (2)
Join Date: Jan 2007
Location: WESTCOAST,HAWAIIANSTYLE, PA KA LO LO
Posts: 3,954
Likes: 0
Received 0 Likes
on
0 Posts
Re: KiddRACING D Series Sidewinder Header *PRE-ORDER!*
I like it the more i thought about it lastnight...
PM me a price shipped to CALI 90620...
I'm willing to try one if the price is right...
PM me a price shipped to CALI 90620...
I'm willing to try one if the price is right...
#11
D Tranny Guru
#13
Thread Starter
Join Date: Oct 2003
Location: atlanta, ga, usa
Posts: 5,899
Likes: 0
Received 0 Likes
on
0 Posts
#15
Honda-Tech Member
Join Date: Oct 2008
Location: NJ, usa
Posts: 1,529
Likes: 0
Received 0 Likes
on
0 Posts
#17
Honda-Tech Member
Re: KiddRACING D Series Sidewinder Header *PRE-ORDER!*
What kind of modifications will have to be performed to clear PS? I have a car that is being developed for enduro and reducing driver fatigue is a major priority.
#18
Honda-Tech Member
#19
Thread Starter
Join Date: Oct 2003
Location: atlanta, ga, usa
Posts: 5,899
Likes: 0
Received 0 Likes
on
0 Posts
Re: KiddRACING D Series Sidewinder Header *PRE-ORDER!*
I think its possible, you woul have to trim the PS bracket , maybe run a smaller pulley on the PS Pump itself.
#24
Honda-Tech Member
iTrader: (1)
Join Date: Mar 2009
Location: Midwest
Posts: 640
Likes: 0
Received 0 Likes
on
0 Posts
Re: KiddRACING D Series Sidewinder Header *PRE-ORDER!*
when do you plan on having a dyno comparison against a few different headers? I'm interested but i would also like to know this is worth the money.
#25
Thread Starter
Join Date: Oct 2003
Location: atlanta, ga, usa
Posts: 5,899
Likes: 0
Received 0 Likes
on
0 Posts