ExospeedAMcrx

What can a custom piston do for you?

• If you’re looking for a bore size or specific compression that is not available off the shelf, a custom piston can get that for you.
• The piston design can match the needs of your camshaft, cylinder head chamber, and stroker setup requirements.

Basic Custom Piston Choices

• You name the Bore Size
• Compression of your choice
• Wrist Pin height adjustments

Optional upgrades
1. Custom coating: Skirts and Top
2. Wrist Pin choices
3. Pin Lock style

Other options available, contact us for any of your other ideas.

What do I need to get a custom piston done for my setup?


We need specific information to do any custom piston. As much information you can give will benefit the design of the piston.

• Bore size. We’ll assume you want the pistons leveled with the deck, specify if not.
• Compression desired(Some setups maybe limited in how high or low the compression will be)
• Type of Cylinder Head used. Note if Milled or Not
• Type of Block used.
• Type of Crankshaft used and its stroke
• Type of Rod used and its length. Note if using a different wrist pin width than usual.
• Type of Fuel: Gas, Alcohol, etc.
• Daily Driven or Race Only
• Head gasket thickness: Using custom thickness or basic OEM thickness HG.
• Wrist Pin type: Standard, Thicker(HighHP Boost), Lighter(All Motor)
• Valves: Standard or Oversize(specify mm size)
• Camshaft specifications: Provide all specs from the manufacturer.

There are other information required, but we can go through that when you’re finalizing your order.

Bore choices:

B16/B18: 81-87mm bore.
H22: 87-90.5mm bore.
D16/D15: 75-79mm bore
K20/K24: 86-90mm bore

Other applications available(F, C, D17, etc).

We have certain specs already calculated with specific camshafts, cylinder head and block combinations.
Some sample combinations:

K24/K20 Head, Skunk2 cams, 89mm, 15:1
LS/VTEC, Skunk2 Pro2 cams, 85mm 14.5:1
D16, Exospeed Stage 4 cam, 78mm, 13:1
D16, Exospeed Stage 4 cam, 75.5mm, 12:1
H22, 95mm crank, SK2 Pro cams, H22 rods, 89mm, 13:1

There are some common combinations that we've done many times that may be suitable to your setup. But if you have your own combination of parts, we can make a piston set that will work with what youre trying to achieve.

Basic Custom Pistons start at $630.00/set
* Any Bore size, compression, wrist pin height relocation, valve pocket size depth and diameter design.
* Includes standard wrist pins, wrist pin locks and ring sets.

B-series 85mm 15:1


H22 89mm 14:1


B16 81.5mm 12.5:1


D16A6 78mm 13:1


H22 89mm 14.5:1


D16A6 75.5mm 11.5:1

ExospeedAMcrx

Piston pics mostly show All Motor high compression ones but we can do Turbo compressions as well. Didnt really show much turbo pistons since they all look pretty similar with their dish or flat faced surfaces.

ExospeedAMcrx

Contact our sales department:

Best way:
Email all your information and questions - sales@exospeed.com

661-775-1963

egturbolsvtec

how much for b series vtec pistons 82mm highest compression u got

ExospeedAMcrx

What compression do you want?

jdmtrdriderpr

Nice looking product!

IT'S ME DAVID

iTrader: (1)

how much 86mm kseries tsx head k24a2 standard valves no mill hiigh boost application 9:0 compression or 9:5

egturbolsvtec

those 14.5:1 pistons but i need them in 82mm

ExospeedAMcrx

Custom pistons are $630.00 comes with the wrist pins and locks.

ExospeedAMcrx

Those are also $630.00 with wrist pins and locks.

Main things to specify are: which head youre using, camshaft specs and valve diameter sizes.

ExospeedAMcrx

Another type of custom piston we can do.

Features:
1. Hard Anodized
2. Pin buttons

ExospeedAMcrx

Contact our sales department:

Best way:
Email all your information and questions - sales@exospeed.com

661-775-1963

mikeymcm

nice stuff will, hope to see you on the east coast again this year.

slowbue

whats the highest i can go on a stock internal b18c

ExospeedAMcrx

Compression or bore? stock internals meaning cylinder head or using stock rods?

low13da9

Bringing back from dead. Still making pistons for h22?