$99 OMNI-POWER 70MM THROTTLE BODY WITH FREE SHIPPING!!
#1
Thread Starter
Join Date: Dec 2004
Location: Where East Meets West, U.S.
Posts: 16,940
Likes: 0
Received 0 Likes
on
0 Posts
$99 OMNI-POWER 70MM THROTTLE BODY WITH FREE SHIPPING!!
Hello HT Members:
The $99 70mm OMNI-POWER THROTTLE BODY IS BACK IN STOCK!! WITH FREE SHIPPING!!
ACT NOW AS THESE SELL OUT FASTER THEN WE CAN REPLENISH!
Omnipower 70mm Taper Bore Throttle bodies are 10mm larger in diameter than the OEM 60mm Throttle body. This results in a 23% larger opening for incoming air and dyno proven 12-15 WHP gains (modified engine with port matched intake manifold opening). Omnipower Throttle Bodies are OEM quality castings which appear stock to the untrained eye. Each Omnipower Throttle body comes with a New gasket, and is a direct bolt on to the factory intake manifold.
Why Cast vs Billet?
As regulations become more and more strict, law enforcement is targeting modified vehicles. Omnipower Cast 70mm Throttle bodies look and function like stock to the average Joe, where as a billet Throttle body sticks out and will quickly become a ticket magnet should you get pulled over.
Key features:
OEM Quality Casting and Appearance
23% Larger Than Stock
12-15 WHP Gains
Includes New 70mm Gasket for Easy Installation
Add a Genuine OMNI-Power Throttle Position Sensor for only $69.99!
Throttle body comes with new gasket and will fit:
88-00 Honda Civic
90-01 Acura Integra
97-01 Acura Integra Type-R
92-01 Honda Prelude
90-02 Honda Accord (98-02 4cyl only)
Note: Taper bore specs are 70mm inlet down to 69mm outlet.
Click Here to purchase or for more info.
Let me know if you have any questions!
The $99 70mm OMNI-POWER THROTTLE BODY IS BACK IN STOCK!! WITH FREE SHIPPING!!
ACT NOW AS THESE SELL OUT FASTER THEN WE CAN REPLENISH!
Omnipower 70mm Taper Bore Throttle bodies are 10mm larger in diameter than the OEM 60mm Throttle body. This results in a 23% larger opening for incoming air and dyno proven 12-15 WHP gains (modified engine with port matched intake manifold opening). Omnipower Throttle Bodies are OEM quality castings which appear stock to the untrained eye. Each Omnipower Throttle body comes with a New gasket, and is a direct bolt on to the factory intake manifold.
Why Cast vs Billet?
As regulations become more and more strict, law enforcement is targeting modified vehicles. Omnipower Cast 70mm Throttle bodies look and function like stock to the average Joe, where as a billet Throttle body sticks out and will quickly become a ticket magnet should you get pulled over.
Key features:
OEM Quality Casting and Appearance
23% Larger Than Stock
12-15 WHP Gains
Includes New 70mm Gasket for Easy Installation
Add a Genuine OMNI-Power Throttle Position Sensor for only $69.99!
Throttle body comes with new gasket and will fit:
88-00 Honda Civic
90-01 Acura Integra
97-01 Acura Integra Type-R
92-01 Honda Prelude
90-02 Honda Accord (98-02 4cyl only)
Note: Taper bore specs are 70mm inlet down to 69mm outlet.
Click Here to purchase or for more info.
Let me know if you have any questions!
#7
Re: $99 OMNI-POWER 70MM THROTTLE BODY WITH FREE SHIPPING!!
Bump for free shipping. What's the realistic shipping time/method if I payed tomorrow? Not an overnight situation, but just want to make sure it's not a 2 week mission. Thanks.
Trending Topics
#9
Thread Starter
Join Date: Dec 2004
Location: Where East Meets West, U.S.
Posts: 16,940
Likes: 0
Received 0 Likes
on
0 Posts
Re: $99 OMNI-POWER 70MM THROTTLE BODY WITH FREE SHIPPING!!
Orders typically ship within 1 business day. Time in transit from our warehouse to MN via ground is only 3 business days normally.